problem with calibration and pitch

[brandon112]

i recently purchased a mixvibes DVS 7 with a maya 44 interface. i got threw the installation, now im having a problem with the calibration of my cd players and when i did get it some what working it doesnt to its normal state in vinyl mode. the pitch is very slow and the song sorts of reverses itself and i cant figure anything else out..any can help..PLEASE!!!!!

[phadedvision]

Welcome to the forums

Could you please post a config. report so it could help us spot your problem a little better?

Peace

[brandon112]

ok im new at mixvibes whats that?

[wazza]

a config report is a list of your setting in mixvibes
to make a config report go PERFERENCES / CONFIG REPORT
that will make list of your setting ...now copy & paste in the forums so we all can see your setting

your config report should look like this

Config Report:

Config 2008/10/01 14:58

OS=Microsoft Windows XP Service Pack 3 build=2600 processor=PROCESSOR_IDENTIFIER=x86 Family 6 Model 13 Stepping 8, GenuineIntel
MixVibes Producer version=7.033 DLL langage=US version=7.030

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=No
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=3 Nb Mixer=0
Managment Type ASIO
Device=EDIROL FA-66 AsioVersion=0 DriverVersion=275
Latency=7 Driver sampling=44100 Nb Input=6 Nb Output=6
Managment Type ASIO
1-LineOut 1&2 left 2-LineOut 1&2 right
3-LineOut 3&4 left 4-LineOut 3&4 right
5-SpdifOut left 6-SpdifOut right

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:MicIn1 left-MicIn1 right
Mode=Relative time
Riaa=No Preamp Left=44 db Preamp Right=44 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=Yes
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=99.320 Volume max left=0.273 Volume max right=0.288 Volume optimum=0.370
Speed Average(100ms)=1.002 Speed Average(1s)=0.999 Speed Average(3s)=1.000


Vinyl 2 not connected
Vinyl 3 not connected
Vinyl 4 not connected

when you make the config report ...play both your C.D players or turntable with the time code C.D's or vinly and put the pitch 0%

here is a link to the mixvibes FAQ...
http://www.mixvibes.com/site/pageeng/page.php?x=faq
There is alot off good info on this page...that will help you

[brandon112]

OS=Microsoft Windows XP Service Pack 3 build=2600 processor=PROCESSOR_IDENTIFIER=x86 Family 6 Model 13 Stepping 8, GenuineIntel
MixVibes Producer version=7.033 DLL langage=US version=7.030

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=No
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=3 Nb Mixer=0
Managment Type ASIO
Device=EDIROL FA-66 AsioVersion=0 DriverVersion=275
Latency=7 Driver sampling=44100 Nb Input=6 Nb Output=6
Managment Type ASIO
1-LineOut 1&2 left 2-LineOut 1&2 right
3-LineOut 3&4 left 4-LineOut 3&4 right
5-SpdifOut left 6-SpdifOut right

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:MicIn1 left-MicIn1 right
Mode=Relative time
Riaa=No Preamp Left=44 db Preamp Right=44 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=Yes
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=99.320 Volume max left=0.273 Volume max right=0.288 Volume optimum=0.370
Speed Average(100ms)=1.002 Speed Average(1s)=0.999 Speed Average(3s)=1.000


Vinyl 2 not connected
Vinyl 3 not connected
Vinyl 4 not connected

[wazza]

thats my config report...so were is yours

[gakto2009]

lol

[brandon112]

Config 2008/12/26 23:21

OS=Microsoft Windows XP Service Pack 3 build=2600 processor=PROCESSOR_IDENTIFIER=x86 Family 15 Model 1 Stepping 2, GenuineIntel
MixVibes DVS version=7.100 DLL langage=US version=7.100

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=No
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=No AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=No Security=No History=No
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=Maya44 USBAudio ASIO driver AsioVersion=0 DriverVersion=34083072
Latency=6 Driver sampling=44100 Nb Input=4 Nb Output=4
Managment Type ASIO
1-OUT 0 - Maya44 2-OUT 1 - Maya44
3-OUT 2 - Maya44 4-OUT 3 - Maya44

Vinyl Configuration
--------------------
Vinyl1 connected=CD
Audio=ASIO source=0:IN 0 - Maya44-IN 1 - Maya44
Mode=absolute
Riaa=No Preamp Left=6 db Preamp Right=0 db Noise Filter=40 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.000 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl2 connected=CD
Audio=ASIO source=2:IN 2 - Maya44-IN 3 - Maya44
Mode=absolute
Riaa=No Preamp Left=6 db Preamp Right=0 db Noise Filter=40 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.000 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000

[wazza]

when you did the config report ...did you have the time code C.D's playing ????....because your time code is 0.000%...you should have it at 90 to 100 %

Time code percent=0.000

and try to run mixvibes in RELATIVE or all RELATIVE ...not absolute mode

Vinyl1 connected=CD
Audio=ASIO source=0:IN 0 - Maya44-IN 1 - Maya44
Mode=absolute


some other thing to check with your C.D players
1)....turn off your AUTO CUE
2)...Don't use the master tempo on your C.D Players

[brandon112]

so how do i set up my configuration report..im sorry i just purchased this software and not very familar with it ..i just need detailed instructions on what to do after the cd installation.