Problems mit MixVibes

[DJ Hudu]

......................................

[DJ Hudu]

...........................

[wazza]

welcome to mixvibes d.j hudu
you have to put your Cross software number in your profile
(click user control panel , go profile)
after you have done that you can go to the download part off the forum & get new Cross update 1.3 + goody's + support

[DJ Hudu]

Hello,
Thank you for your fast answer, i downloaded Cross 1.3.1 .
But there is the same Problem...
The Interface does not connect with one TT.
The quality of the one which connected is perfect!

[hemskoc]

Hi DJ Hudu. Welcome to the MV forums
*Check your Needle cartridge connecters. Unscrew them, blow in the socket, and 'jiggle' them around.
*What is the % of timecode are your getting when your are in 'preferences>vinyl' calibration? (on the working deck, and the not working one?)
*Try plugging the working TT into the channel that seems to be NOT working. If that is ok, then it is a problem with your TT/needles/cables/ground wires.
*Are the outputs from the u46 plugged into 'line ' inputs on your mixer?
Cheers

[polocorp]

the problem is probably the low power on Macbook USB ports. Some ports provide more power than others. I recommend you buy a 9V power supply for your U46 if this problem persists...

[John Wo_O]

I thought I read that the U46mk2 had to always be plugged in the same USB port. Was that just for DVS or is it also for Cross? Could it be the problem?

[UncleVibes]

on a PC yes