problem with using t.c vinyl

[FLIP_G]

Alls I get wen i try to use the time coded vinyls is a high pitched noise, I try to calibrate but it says

no signal found on input, check the turntable connection (as far as I know its all connected correct)
mixvibes will not work with your installation retry the test
which i do and get the same

This is my config report

Config Report:

Config 2008/11/15 17:41

OS=î
build=6000 processor=PROCESSOR_IDENTIFIER=x86 Family 15 Model 4 Stepping 1, GenuineIntel
MixVibes DVS version=6.370 DLL langage=US version=6.290

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Priority program=normal Low gui priority=No Equalization bypass=No
Microsoft codec=No MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=0
Windows Caption=No Style=XP2005
TAG V1=Yes TAG V2=No

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Lock Out=Yes Volume=Yes Equalization=Yes Loop=No Effects=No
Loop in bar boundaries=No Security=No History=Yes
Compressor=No Limiter=No
Noise=No Vol=0 Crakle=No Vol=0 Back Mute=No Scratch Sensibilty=0

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type Multi Channel
Device=Speakers (Creative SB Audigy 2 ZS (WDM)) Latency=120

Vinyl Configuration
--------------------
Style mix=scratch

Vinyl1 connected=vinyl version 2
Audio=Analog Mix (Line/CD/Aux/TAD/PC) source=default
Mode=Absolute
Riaa=Yes Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000
Vinyl2 connected=vinyl version 2
Audio=Speakers (Creative SB Audigy 2 source=default
Mode=Absolute
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000

greatly appreciate anyones help, cheers

[N-deep]

Hi Flip,

Can you please update to the latest version of DVS?

Update DVS 7.1 & releases notes

Moreover your soundcard was not detected by the software. Did you run the install wizard to setup MixVibes?

[jiel]

please follow this tutorial video to setup your DVS correctly :

http://www.mixvibes.com/site/pageeng/page.php?x=videotuto_dvspack

[FLIP_G]

Hi Flip,

Can you please update to the latest version of DVS?



Moreover your soundcard was not detected by the software. Did you run the install wizard to setup MixVibes?

I try this and it says access denied?

[gakto2009]

try this link...

http://vimeo.com/1225208?pg=embed&sec=1225208