problem with calibration and pitch

[djegun]

Could you send us a screenshot of your vinyl/cd input tab with cd player ON please?

[brandon112]

how would i do that

[phadedvision]

To take a screenshot with Windows, press Control + Print Screen simultaneously. After that, open MS Paint and press Control + V to paste the screenshot. Save the file, then post the image on the forum in a post by using the Upload Attachment function next to the Options tab underneath the Text Box. You can either choose to place the file inline or have it as a clickable attachment.

[gakto2009]

Vinyl Configuration
--------------------
Vinyl1 connected=CD
Audio=ASIO source=0:IN 0 - Maya44-IN 1 - Maya44
Mode=absolute
Riaa=No Preamp Left=6 db Preamp Right=0 db Noise Filter=40 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.000 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl2 connected=CD
Audio=ASIO source=2:IN 2 - Maya44-IN 3 - Maya44
Mode=absolute
Riaa=No Preamp Left=6 db Preamp Right=0 db Noise Filter=40 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.000 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000

From brandons config report i can see that the Noise Filter is cranked right up to 40Hz...

This will block any timecode will it not??

use the advanced button and turn down the Noise Filter and try calibration again... see below...

[brandon112]

so what do i do after i turn the noise filter to 0?

[gakto2009]

use the advanced button and turn down the Noise Filter and try calibration again...

[brandon112]

ok and if you dont mind whats the correct way to calibrate my players

[gakto2009]

Press play on both of your cd players with the pitch set at 0%, then press the Calibrate buttons in the vinyl configuration.

[gakto2009]

make sure your timecode cds are in your cds players! lol