[SOLVED] cant get it to work

[justinryan]

hi,
i just wanted to know, how to get cds n vinyls to control the songs on the mixvibes programs. I don't think its normal, for everythin is plugged in and installed. when i play a regular cd or vinyl the sound comes out fine. But when i use time coded cd or vinyl i just get i highpitched ringing or beeping sound. I looked at the faq, n tried to sort out the ground connection, but i dnt think it was that. When i just press play on the program, i can hear the song clearly though my speakers. With the time coded disks, it doesnt affect the interface of the prgram in any way....

heres the report

Config Report:

Config 2008/11/11 15:16

OS=Microsoft VISTA build=6000 processor=PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 11, GenuineIntel
MixVibes DVS version=7.100 DLL langage=US version=7.100

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=10 Load time=normal
Low gui priority=Yes Equalization bypass=Yes
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=ASIO Multimedia Driver AsioVersion=0 DriverVersion=65543
Latency=95 Driver sampling=48000 Nb Input=6 Nb Output=4
Managment Type ASIO
1-U46DJ (3- U46DJ) - 2 2-U46DJ (3- U46DJ) - 2
3- 4-

Vinyl Configuration
--------------------
Vinyl1 connected=CD
Audio=ASIO source=4:U46DJ (3- U46DJ) - 3-U46DJ (3- U46DJ) - 4
Mode=absolute
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.000 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl2 connected=vinyl version 2
Audio=ASIO source=2:U46DJ (3- U46DJ) - 1-U46DJ (3- U46DJ) - 2
Mode=absolute
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000

[wazza]

the highpitched ring sound you here is the sound of the time code signal ......click off the by-pass button and click on the vinly button
to use time code vinly

( some sound card you have to go to the sound card driver panel and mute the in-puts to stop the highpitch ring )

by the look of your config report you have two problems

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=ASIO Multimedia Driver AsioVersion=0 DriverVersion=65543
Latency=95 Driver sampling=48000 Nb Input=6 Nb Output=4
Managment Type ASIO
1-U46DJ (3- U46DJ) - 2 2-U46DJ (3- U46DJ) - 2
3- 4-

1 )...your latency is 95ms ...thats way to high
it should be at 6 or 7 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.000 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000

2)...you don't have any time code signal percent
you should have 98 to 100% signal

I don't know if thats because you had the bypass button on or because you had not had the time code vinly running when you did the config report

[polocorp]

Are you able to play a track without external control ?

You should run the install wizard ? This should automatically mute the inputs.

[justinryan]

Ive manged to get everything to play now by usin the tt and the cdj, but i still have a ring when i play the music. When i run the install wizard, it tells me on the second page that my lattency is 256. Where else can you change the lattency apart from U46MKII control pannel? I reinstalled the control panel with the vista version so it works now, but when i change the lattency with it, it crashes, and i have to restart it.

[polocorp]

which driver version are you using ?

you should MUTE the inputs in your U46 control pannel to eliminate the high pitch sound

[justinryan]

cheers guys,
it was the u46mkII control pannel that was giving off the ring. I really appreciate the help, the prgram works a treat now!

[polocorp]

Good to hear, thanks for confirming. Looking forward to hearing your mixes or seeing some videos of your DJing action up here.