NOT HAPPY!!!!!!!!!!!!!!!

[djnath]

recently iv'e had nothing but troubles with mixvibes DVS....
tonight at a wedding reception m/v decided to stop working right before the bridal waltz!!!! gggggggggrrrrrrrrrr
anyway what happen was, the song was playing and all of a sudden it stopped..... the timeline stoped... the record was still spining and to me it need re-calibrating.. so i done that and it lasted half a song before i had to re-claibrate again!!!!! WHY?????????????


also the other day when i selected a song and draged it to the left deck and hit play,,, the little guage thing was telling me that my needle was near the end of the record , when it wasnt,,,,,, and for some reason my music collection was scrolling like crazy..... IM SORRY THIS IS HARD FOR ME TO EXPLAIN,,, I NEED TO GET THIS WORKED OUT ASAP,, OTHERWISE IM GOIN TO CONSIDER BUYING SERATO..... LOL

[djnath]

Config 2011/02/20 01:05

OS= build=7600 processor=PROCESSOR_IDENTIFIER=x86 Family 6 Model 37 Stepping 2, GenuineIntel
MixVibes DVS version=7.218 DLL langage=US version=7.210

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=Yes
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=3
TAG V1=Yes TAG V2=No

Mix Setting
--------------------
AutoCue=Yes AutoGain=No AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type Multi Channel
Device=Speakers (High Definition Audio Device) Latency=100

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=Speakers (High Definition Audio source=default
Mode=all relative
Riaa=Yes Preamp Left=3 db Preamp Right=2 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl2 connected=vinyl version 2
Audio=Microphone (High Definition Aud source=default
Mode=all relative
Riaa=Yes Preamp Left=41 db Preamp Right=41 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.049 Speed Average(1s)=0.000 Speed Average(3s)=0.000

[UncleVibes]

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type Multi Channel
Device=Speakers (High Definition Audio Device) Latency=100


wrong audio setup you need to have your sound options set in Asio
Redo the setup assistant

[wazza]

also the other day when i selected a song and draged it to the left deck and hit play,,, the little guage thing was telling me that my needle was near the end of the record , when it wasnt,,,,,, and for some reason my music collection was scrolling like crazy..... IM SORRY THIS IS HARD FOR ME TO EXPLAIN,,, I NEED TO GET THIS WORKED OUT ASAP,, OTHERWISE IM GOIN TO CONSIDER BUYING SERATO..... LOL

on the mixvibes time code vinyl the last 2 grooves ( side one ) are
for scrolling music collection & media base in abs mode

what you do is put the needle on the end grooves to scrole for the track you would like to play ...then you put the needle to the start off the time code vinyl & the track you picked will load into that deck

[djnath]

wow thats a great feature for track selection!!! i didnt relise that ,,, but the thing is, its doing it when the needle is at the begining or half way along the record

[wazza]

never seen that before...

is it both turntables....or just the one side

[djnath]

just on the left side!!! ALSO today i used them and when i hit bypass on the left side to use a normal record it works fine but when i bypass the right hand side it dont work......... i just get a crappy static noice.... i swaped the needles around and its still has the problem on the right side!!!!!!!! NOTHING BUT TROUBLES WITH MIXVIBES AT THE MOMENT!!! im knocking back jobs cause of these problems... its not good!

[Hollender]

I had the same kind of trouble a few times.
Most times the cause is a bad signal from your needle.
That doesn't mean that your needle is bad or has poor electrical contacts, it also can bee a poor contact in a cinch plug of your turntable. That's why you keep having the problem on the same turntable even if you switch the needles.
Hope this info works for you.