Control Signal in Sound (or in Output)

[Sebastian]

Hello,
I'm getting the control signal of the time code vinyl as a sound signal within the regular sound - it's not as loud as when I set it to BYPASS (or in other words, it gets louder when I press BYPASS)

It's only on my left channel.

I've reset all settings and the problem is still there...

Any suggestions?

Setup:
Desktop PC (AMD Phenom II 955 X4, 4GB RAM, Windows 7 64-bit)
U46 MK2
2* Numark TTX (using the line signal to the soundcard)
Vestax PMC 05 Pro III

Config Report:

Config 2011/01/29 01:22

OS= build=7600 processor=PROCESSOR_IDENTIFIER=AMD64 Family 16 Model 4 Stepping 2, AuthenticAMD
MixVibes DVS version=7.400 DLL langage=DE version=7.400

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=Yes
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=MIXVIBES U46MK2 ASIO AsioVersion=0 DriverVersion=2
Latency=6 Driver sampling=44100 Nb Input=4 Nb Output=6
Managment Type ASIO
1-MIXVIBES U46 1/2:L 2-MIXVIBES U46 1/2:R
3-MIXVIBES U46 3/4:L 4-MIXVIBES U46 3/4:R

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:MIXVIBES U46 1/2:L-MIXVIBES U46 1/2:R
Mode=absolute
Riaa=No Preamp Left=4 db Preamp Right=4 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.521 Volume max right=0.521 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl2 connected=vinyl version 2
Audio=ASIO source=2:MIXVIBES U46 3/4:L-MIXVIBES U46 3/4:R
Mode=absolute
Riaa=No Preamp Left=4 db Preamp Right=4 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=100.000 Volume max left=0.510 Volume max right=0.510 Volume optimum=0.370
Speed Average(100ms)=1.000 Speed Average(1s)=0.999 Speed Average(3s)=0.998


Vinyl 3 not connected
Vinyl 4 not connected

Thanks in advance,

Sebastian

[Blackbrook]

Try to enable and disable the bypass a few times. This worked for me at the 7.41beta, maybe it was in the 7.4 too.

Greetings,

Steve

[Sebastian]

Hey, thanks for the answer. I did that before and it didn't change anything.

But I started the program today and it worked just fine - don't know why or how - (I've restarted it and the computer yesterday a couple of times without success..)