Enable extern effect Cross Pack

   Post your tips and tutorials here

Enable extern effect Cross Pack

Postby Twice As Nice on 21 Jun 2011, 16:49

Hi

a week a go i bought the MixVibes Cross Pack, wich includes the timecode system, software and soundcard U46 MKII. Now i have the following setup:

-Tabletops "American Audio Radius 3000"
-Mixer "Behringer DJX 750"
-Laptop "Sony VAIO 2GB RAM & 1.8 Hz Intel core

Everything works fine, and i'm very happy with my purchase, altough I have a question. When I play with Cross and my tabletops, I can't use my effects that are availaible ony my tabletop, is this normal?

And about the timecode CD, do I have to play them whole or a piece, and wich function has it?

A lot of questions I know, but I hope to get some response!

Excuses for the bad English and thank you!

Aäron Schoutteten
Twice As Nice Deejays
Belgium-EUROPE
User avatar
Twice As Nice
 
Posts: 11
Joined: 21 Jun 2011, 11:18
Location: Brakel,Belgium


Re: Enable extern effect Cross Pack

Postby christiankoopmann on 21 Jun 2011, 16:53

Hey,

you can't use the effects of your CD player when using Timecode CDs. The Effect manipulates the Timecode Signal which decrease your Timecode Quality and then you have problems with controling your Cross.
You can only use the effects at Cross for your songs.

You can, depends on the modus you use Cross, play any part of the cd or the correct timestamp of the cd.
When you use the relative mode at Cross you can play at every position at the CD to controll Cross.

At absolute modus you have the same timestamps at Cross as the CD player has. CD Player time = Cross time for the song

regards
Christian
Image
Image
February 2012 Mixvibes DJ of the Month
DVS 7, Cross (DJ), U-Mix Remote App (iPad & iPhone App)

MEMBER OF:
:cool: c00l People MV Society :cool:
User avatar
christiankoopmann
 
Posts: 1823
Joined: 19 Dec 2008, 15:44
Location: Paderborn, Germany


Re: Enable extern effect Cross Pack

Postby Twice As Nice on 22 Jun 2011, 18:52

Thanks for this usefull information Christian!
Now, when I want to set a CUE point with my player, the music file doesnt stop always? And when it stops and I hit the CUE button, the music file begins to play, even when i release the button, just like PLAY/PAUSE. Do I have to set my CUE points with the software?

And to close I have another "problem". When I select a track and put it into a deck no problem. When a push the PLAY button the track begins to play, no problem. but when I PAUSE the track while playing, the WAVEFORM is liek zooming in and zooming out very fast, without I do something. Is this normal?


Already thank you Christian for your help! I appreciate!
User avatar
Twice As Nice
 
Posts: 11
Joined: 21 Jun 2011, 11:18
Location: Brakel,Belgium


Re: Enable extern effect Cross Pack

Postby Hannes on 22 Jun 2011, 19:06

Hi,


what cd players are you using, and how do you have them set up?

For the record: You can use an external fx-unit, like Pioneer 500 or similar, without problems as long as you´re using the mixer´s fx-loop.

No FX on the signal from the CDJs though! The timecode MUST remain 100% untouched!

cheers
June 2012 Mixvibes DJ of the month

https://soundcloud.com/han-nes-10/fridaybeatdown2ndedition
no support by pm

beta troll

Macbook Pro 13, late 2011, 6GB RAM, 480GB Crucial M500
Thudrumble TR-1S, Vestax VFX-1, ESI Maya USB+, Rane SL2
User avatar
Hannes
 
Posts: 4168
Joined: 07 Dec 2010, 01:57
Location: Vienna


Re: Enable extern effect Cross Pack

Postby Twice As Nice on 22 Jun 2011, 20:13

Hi

I have two AMERICAN AUDIO RADIUS 3000 table top cd-players and a Behringer DJX750 mixer.

The two players are connected with my soundcard (MV U46 MKII) on INPUT 1 & 2. The OUTPUTS are connected on two channels(LINE INPUT) on my mixer. The soundcard is connected to my netbook with a MIDI/usb cable.

Now I've seen on the website of the crosspack that my CD players are not copatible for the MIDI function of Cross. Is that a problem, and is that midid funtion something different from the timecode system?

Thank you!
User avatar
Twice As Nice
 
Posts: 11
Joined: 21 Jun 2011, 11:18
Location: Brakel,Belgium


Re: Enable extern effect Cross Pack

Postby Hannes on 22 Jun 2011, 20:21

Hi,

sorry for asking again, i overread your first post,
i took a quick look in the radius´s manual, maybe this helps you.

-set the jogwheels to normal
-disable the key-lock/tempo-lock
-disable any fx
-in Cross change from "cd" to "vinyl" on the gui (little button next to the waveforms)

You could also set the Radius up to control Cross via MIDI.

MIDI is just a way of sending control-signals, on the homepage you saw that there is no mapping for it.
So you´ll have to assign it yourself, which is quite easy to do in Cross´ Midi-Menu.
Just connect the players via usb to the PC, open Cross and select them from the preferences´ midi-tab.

There ýou´ll see all the commands that can be mapped to the players.


cheers
June 2012 Mixvibes DJ of the month

https://soundcloud.com/han-nes-10/fridaybeatdown2ndedition
no support by pm

beta troll

Macbook Pro 13, late 2011, 6GB RAM, 480GB Crucial M500
Thudrumble TR-1S, Vestax VFX-1, ESI Maya USB+, Rane SL2
User avatar
Hannes
 
Posts: 4168
Joined: 07 Dec 2010, 01:57
Location: Vienna


Re: Enable extern effect Cross Pack

Postby Twice As Nice on 22 Jun 2011, 20:23

This is all I wanted to know! Hopefully it works now, I find it great software!

Thank you very much, I owe you!

Greetings from Belgium
User avatar
Twice As Nice
 
Posts: 11
Joined: 21 Jun 2011, 11:18
Location: Brakel,Belgium


Re: Enable extern effect Cross Pack

Postby Hannes on 22 Jun 2011, 20:30

no prob,

a little warning though: joqwheels can be pretty hard to map, so just dont give up , but come back here for help :cool:
June 2012 Mixvibes DJ of the month

https://soundcloud.com/han-nes-10/fridaybeatdown2ndedition
no support by pm

beta troll

Macbook Pro 13, late 2011, 6GB RAM, 480GB Crucial M500
Thudrumble TR-1S, Vestax VFX-1, ESI Maya USB+, Rane SL2
User avatar
Hannes
 
Posts: 4168
Joined: 07 Dec 2010, 01:57
Location: Vienna


Re: Enable extern effect Cross Pack

Postby Twice As Nice on 22 Jun 2011, 20:52

I've mapped my players with succes! But I have another question...

When you play with the player in MIDI mode, you can't use your soundcard for the output signal or what? Wich setup do I have to do?

grtz
User avatar
Twice As Nice
 
Posts: 11
Joined: 21 Jun 2011, 11:18
Location: Brakel,Belgium


Re: Enable extern effect Cross Pack

Postby Hannes on 22 Jun 2011, 21:00

Nice, glade to see it working for you.

Shure you can use the soundcard, just select external mixer in the audio-preferences. Deck A->out 1/2 and Deck B->out 3/4

cheers.

P.S. If you want to use the players midi-only (without Timcode-Cds)
you should take a look at the built-in mappings, maybe for the pioneers cdjs, double the one that fits your needs best (just click "x2" in the midi-prefs) and then remap the commands to the according midi-buttons your radius, also rename it, so you dont mess it up ;)
June 2012 Mixvibes DJ of the month

https://soundcloud.com/han-nes-10/fridaybeatdown2ndedition
no support by pm

beta troll

Macbook Pro 13, late 2011, 6GB RAM, 480GB Crucial M500
Thudrumble TR-1S, Vestax VFX-1, ESI Maya USB+, Rane SL2
User avatar
Hannes
 
Posts: 4168
Joined: 07 Dec 2010, 01:57
Location: Vienna


Next

Return to Tips & Tutorials




Who is online

Users browsing this forum: No registered users and 4 guests

 
 
   
 
© 2014 Mixvibes
 
cron