U-Mix Control Pro 2, Cross 3.43 and a M1 Macbook Pro!

   Discuss technical issues with the community. Mixvibes staff provides no support on this board.
Forum rules
This is a community forum. To reach Mixvibes staff, please send your support requests through this page.

Users with Cross DJ Mac bought in the App Store please join group User Cross DJ App Store to write in the support forum ucp.php?i=172

Other users must follow these rules.:
[size=115]* Register your software (User Control Panel > Profile > Serial Number)
* Go to the download center and install the latest versions of software and drivers
* Use the search tool to look into topics
* Check the FAQs to make sure your problem isn't already solved.

U-Mix Control Pro 2, Cross 3.43 and a M1 Macbook Pro!

Postby rhopkins on 10 Jan 2021, 07:21

TLDR; - It works!

Everything I have read had me thinking it would not, but I have a 13" M1 Chip Macbook Pro with 8GB RAM and Cross 3.43 runs like a dream with my U-Mix Control Pro 2.

I recorded a short mix in Dual Stero mode and all was fine. No glitches or cutouts.

Unless there's something more (perhaps at a hardware level?) that I don't understand and moght be damaging...? Not sure, but looking around at alternatives recently I'm so happy this all works.
MacBook Pro - 15" (Mid 2014)
2.2Ghz Processor
16GB RAM

U-Mix Control Pro 2
Cross 3.3.10
rhopkins
 
Posts: 531
Joined: 28 Jan 2011, 13:10
Location: Brisbane


Re: U-Mix Control Pro 2, Cross 3.43 and a M1 Macbook Pro!

Postby RoJeC on 10 Jan 2021, 15:40

Once this works there's not likely aproblem to be expected. As long as the iOS version stays compatible Cross will work.

Hardware same kind of status. As long as long as USB1.1 is supported MIDI will work.
Audio driver will also work as long as nothing is changed in the iOS on this.
Remaing is the power to the U-Mix Control Pro. With new USB usuallly more power can be deilvered than needed (though connected devices keep sharing this)

So pretty sure you're OK as there's not really a thing that can trouble you. So fine tuning the latency to find your fastest and safe value could be your next step...
Ronald

Image

downloads + more forums = Register license(ucp.php?i=169)
Apple store new user? first read viewtopic.php?f=259&t=34199
Manual alternative link: ? https://www.mixvibes.com/wp-content/uploads/2017/10/cross-dj-user-manual.pdf
Audio dropouts? Increase audio 'buffer size' value.
FAQ iOS / Android / PC / MAC http://www.mixvibes.com/help/
Soundcard not available/working? Try the 32bit version of Cross (is also installed).
RoJeC
 
Posts: 4908
Joined: 20 May 2011, 07:55
Location: Bussum, Netherlands


Re: U-Mix Control Pro 2, Cross 3.43 and a M1 Macbook Pro!

Postby rhopkins on 11 Jan 2021, 01:35

The only reason for my post was that Serato, Traktor and plenty of other DJ Software companies have advised against using their software and hardware with Appleā€™s M1 chip. In some cases they even suggested things might seem to work but damage would be done to controllers.
MacBook Pro - 15" (Mid 2014)
2.2Ghz Processor
16GB RAM

U-Mix Control Pro 2
Cross 3.3.10
rhopkins
 
Posts: 531
Joined: 28 Jan 2011, 13:10
Location: Brisbane



Return to Community Support




Who is online

Users browsing this forum: Majestic-12 [Bot] and 19 guests

 
 
   
 
© 2014 Mixvibes