Page 1 of 1

MWM Phase DVS with Mixvibes?

PostPosted: 16 Apr 2019, 18:41
by discopex
Has anybody yet been able to try if Phase DVS system works with Mixvibes Cross?

Re: MWM Phase DVS with Mixvibes?

PostPosted: 09 May 2019, 23:56
by discopex
I will answer this one myself. Borrowed a Phase from friend and with custom setting adjusted to 3000 Hz Mixvibes DVS seemed to work alright. So maybe I'll order those in the near future. :cool:

Re: MWM PHase?

PostPosted: 10 May 2019, 16:38
by djeazy
How was the sound and accuracy when you tried it?

Re: MWM Phase DVS with Mixvibes?

PostPosted: 12 May 2019, 20:31
by discopex
It felt at least as good as vinyl (and better than timecode cd with Denon DN-S3500 which has some drift when scratching). :cool:

Re: MWM Phase DVS with Mixvibes?

PostPosted: 13 May 2019, 18:19
by Team@Mixvibes
Thats cool that it is working! I assumed it would be possible since it is sort of a universal DVS system, but don't have it to test yet myself.

I have reached out to the team to see if they have had a chance to test it but didn't hear back on that yet.

Regards,
Adam @Mixvibes

Re: MWM Phase DVS with Mixvibes?

PostPosted: 04 Jul 2019, 12:34
by discopex
Got my own Phase DVS unit two days ago and played my first gig yesterday!

Setup:

Pioneer DJM-450
Phase DVS
2 old turntables
Mixvibes Cross 3.4.3 64-bit
Lenovo X250 running Windows 10

The thing with Pioneer DJM-450 is that you need to have Rekordbox open so it won't cut off DVS usb inputs (crazy). So, first open Rekordbox, then change the audio setting from Pioneer ASIO to laptop internal soundcard. Next, start Mixvibes and set Pioneer ASIO in it. For Phase DVS signal I used 3kHz Sinus timecode setting.

I had practically zero issues, the only thing was I needed to charge the Phase a bit in the middle of the (5+ hour) gig. :cool: