Discuss technical issues with the community. Mixvibes staff provides no support on this board.
by djdad1970 on 02 Feb 2018, 23:28
Hi, helping a friend to map the Vfx Control with VirtualDJ and came across a firmware bug. Not sure if its the right place to report though.
When sending 90 12 00/7F (left deck LOOP LED Nr. 6), LED turns off/on properly When sending 90 13 00/7F (left deck LOOP LED Nr. 7), LED turns off/on properly
But if i do the same on Right deck, both LEDs Nr.6 and Nr.7 turn on/off with the same MIDI Note 91 12 00/7F or 91 13 00/7F
Since the issue is present only on Right deck, i suppose its a firmware bug. Is there any update available ? Searched the Downloads area but couldnt find any.
-
djdad1970
-
- Posts: 1
- Joined: 02 Feb 2018, 18:24
by daniel clark on 02 Feb 2018, 23:32
your comming out of left field ,, Cross Vfx is discountiuned soft ware ,, and you are trying to map to vitrul DJ ,, but hope may not be lost ,, if you get a responce from a user that is a MIDI monster ,,be avaible to plead your case with any info he might need didnt see your software badge ,, figdj might be able to help ,, trying my best not to speak for him /
January 2012 Mixvibes DJ of the month MEMBER OF: C00l People MV Society 2014 dell XPS8700 intel core i5 4400@3.10ghz 12 gigs DDR3 ram NVDIA GeForce GT635 Win 10 /64 bits OS Realteck 7.1 Home USB sound dogle Asus VE247H monitor Logitec G-15 ser 1 gaming keyboard U-Mix Control Pro 2
-
daniel clark
-
- Posts: 6861
- Joined: 31 Oct 2008, 01:01
- Location: Charleston,S C
-
by gakto2009 on 03 Feb 2018, 18:57
If it doesn't do the same in MV Vfx then its not a bug in the firmware... you will probably find there has been updates to the Virtul DJ software to do with MIDI CC transport but there hasn't been any updates to the Vfx controller to keep up with the changes.
I dont have a Vfx controller but you can check the compatibility by monitoring the output of Virtual DJ with a MIDI monitor and see if they match that of the controller...
if you hook up the Vfx controller to a MIDI monitor and ask the MIDI monitor to send the control signals right back to the Vfx controller, one of the physical controls will control the led in question (Per side, ie, left deck, right deck)
On the H&H xone dx, the MIDI cc output of the channel gain controls are the same as the cc input for the VU meter leds.
you can work out your entire map by using this method...
let us know how you get on.
..!.. ..!.. NO SUPPORT BY PM ..!.. ..!..
-
gakto2009
-
- Posts: 1275
- Joined: 16 Aug 2006, 14:41
- Location: Scotland
-
by gakto2009 on 03 Feb 2018, 21:19
daniel clark wrote::eek: ooops forgot about gakto 2009 ,, old school MIDI monster
lol, im only 36 years old! but old skool maybe Wait till you see what im building, lol... im going to put full details and information here on the MV forum, see if i can liven the place up a little lol.
..!.. ..!.. NO SUPPORT BY PM ..!.. ..!..
-
gakto2009
-
- Posts: 1275
- Joined: 16 Aug 2006, 14:41
- Location: Scotland
-
by daniel clark on 03 Feb 2018, 21:22
may be ,, this fourm is as dead as the moss around a dying tree looking foward by the way impressive work on the car pic ,, thought it was real ,, would have been good promo for mv ,,
January 2012 Mixvibes DJ of the month MEMBER OF: C00l People MV Society 2014 dell XPS8700 intel core i5 4400@3.10ghz 12 gigs DDR3 ram NVDIA GeForce GT635 Win 10 /64 bits OS Realteck 7.1 Home USB sound dogle Asus VE247H monitor Logitec G-15 ser 1 gaming keyboard U-Mix Control Pro 2
-
daniel clark
-
- Posts: 6861
- Joined: 31 Oct 2008, 01:01
- Location: Charleston,S C
-
by gakto2009 on 03 Feb 2018, 21:53
daniel clark wrote::idea: may be ,, this fourm is as dead as the moss around a dying tree looking foward by the way impressive work on the car pic ,, thought it was real ,, would have been good promo for mv ,,
i have noticed lol, everything is so dated now... it needs a good kick in the ***. ill be posting information about my project next week, im still waiting on some parts coming via post and i can get started
..!.. ..!.. NO SUPPORT BY PM ..!.. ..!..
-
gakto2009
-
- Posts: 1275
- Joined: 16 Aug 2006, 14:41
- Location: Scotland
-
Return to Community Support
Users browsing this forum: No registered users and 77 guests
|
|
|