Settings Cross on PC keep frozen after disconnected Pioneer

   Discuss technical issues with the community. Mixvibes staff provides no support on this board.
Forum rules
Click here to join MIxvibes on DISCORD https://discord.gg/gMdQJ2cJqa

Settings Cross on PC keep frozen after disconnected Pioneer

Postby Frans on 20 Nov 2017, 20:20

I connected the Nexus 2000 on the PC with Cross 343. Every function was parallel working. Change the settings on the Nexus (vinyl brake function). While te player was going on, I tip on the start/stop button on the Nexus. The player of the Nexus and Cross stopped slowly. So, OK. After disconnecting the Nexus, I use the start/stop on the PC again. Now the player of Cross also stop slowly. I tried the FX button of Cross on/off, but this one is not is activated. Is there a possibillity like a refresh or how can i fix this, without connect te Nexus again.
Frans
 
Posts: 104
Joined: 01 Sep 2008, 18:38
Location: Holland/Dutch/Netherlands / City: Doetinchem


Re: Settings Cross on PC keep frozen after disconnected Pion

Postby RoJeC on 21 Nov 2017, 02:06

Try changing the FX in Cross for that deck to something else than brake. Might still be the cause.
Ronald

Image

Manual alternative link: ? https://www.mixvibes.com/wp-content/uploads/2017/10/cross-dj-user-manual.pdf
Audio dropouts? Increase audio 'buffer size' value.
FAQ iOS / Android / PC / MAC http://www.mixvibes.com/help/
Soundcard not available/working? Try the 32bit version of Cross (is also installed).
RoJeC
 
Posts: 4926
Joined: 20 May 2011, 08:55
Location: Bussum, Netherlands


Re: Settings Cross on PC keep frozen after disconnected Pion

Postby Frans on 21 Nov 2017, 17:09

Hi RoJeC

i already did. But it seems like an "Cross under skin" setting between Cross and the Nexus, which not is the same like the Cross FX Brake function.
Cause, when i change the settings of the the brake function on the Nexus, the setting of the Cross FX doesn,t react.
Frans
 
Posts: 104
Joined: 01 Sep 2008, 18:38
Location: Holland/Dutch/Netherlands / City: Doetinchem


Re: Settings Cross on PC keep frozen after disconnected Pion

Postby Frans on 25 Nov 2017, 01:05

I solved this issue by editing the Mixvibes.settings file (C:\Users\xxxxx\AppData\Roaming\MixVibes).

<VALUE name="Brake Time A" val="5999"/>

Changed into:
<VALUE name="Brake Time A" val="0"/>
Frans
 
Posts: 104
Joined: 01 Sep 2008, 18:38
Location: Holland/Dutch/Netherlands / City: Doetinchem


Re: Settings Cross on PC keep frozen after disconnected Pion

Postby RoJeC on 25 Nov 2017, 11:10

Great you found this. Still doesn't really explain why it's being applied.

Given your solution you might want to try to solve this by selecting the Brake FX and then use the knob faders in the Cross interface. The knob state is the value that you modified. You'll have to check yourself which of the 2 knobs it is (unless you've set to use 1, which while typing makes me think that this might be your problem... Interface using 1 knob and HID using 2 so it seems like you did all you could while the hidden knob still has impact..).

Editing the settings file isn't recommended as it might easily effect more when not done right.
Ronald

Image

Manual alternative link: ? https://www.mixvibes.com/wp-content/uploads/2017/10/cross-dj-user-manual.pdf
Audio dropouts? Increase audio 'buffer size' value.
FAQ iOS / Android / PC / MAC http://www.mixvibes.com/help/
Soundcard not available/working? Try the 32bit version of Cross (is also installed).
RoJeC
 
Posts: 4926
Joined: 20 May 2011, 08:55
Location: Bussum, Netherlands


Re: Settings Cross on PC keep frozen after disconnected Pion

Postby Team@Mixvibes on 26 Nov 2017, 21:16

Hi guys and a big thanks to RoJeC for helping troubleshoot this issue.

@Frans: This issue most likely has to do with the Player Start and Stop knobs on the 'General' page in the settings. These are different then the brake FX and are what the CDJ brake adjustment knobs are controlling. I am not 100% sure, but these are most likely linked to the values you changed in the .settings file.

Adam @Mixvibes
For support requests, you can check out the FAQ and reach our support staff at this page.
Thank You!
Team@MixVibes gives no support on the forums including via PM
User avatar
Team@Mixvibes
 
Posts: 947
Joined: 18 Mar 2010, 12:51


Re: Settings Cross on PC keep frozen after disconnected Pion

Postby RoJeC on 26 Nov 2017, 22:51

After looking at the settings file indeed the value you changed is as Adam mentions. Has nothing to do with FX.

Now it works I can only recommend to always release Brake FX, even if all works as you might switch back to the deck finding it to ' not work' as the brake is still on.
Ronald

Image

Manual alternative link: ? https://www.mixvibes.com/wp-content/uploads/2017/10/cross-dj-user-manual.pdf
Audio dropouts? Increase audio 'buffer size' value.
FAQ iOS / Android / PC / MAC http://www.mixvibes.com/help/
Soundcard not available/working? Try the 32bit version of Cross (is also installed).
RoJeC
 
Posts: 4926
Joined: 20 May 2011, 08:55
Location: Bussum, Netherlands


Re: Settings Cross on PC keep frozen after disconnected Pion

Postby Frans on 27 Nov 2017, 21:43

Thanks for al reactions:

Resume:
Before disconnecting the Nexus (in combination with the PC with Cross), always turn the Nexus start and brake function to 0. Because this settings will be freezed at the Cross side.
After disconnecting the Nexus you can't change the settings of the FX brake by the Cross program. Then the only way is connect the Nexus again and change the start and brake to 0 or change the Mixvibes settings file like i did. When i have more time, I will connect/disconnect the Nexus and check more settings.
Frans
 
Posts: 104
Joined: 01 Sep 2008, 18:38
Location: Holland/Dutch/Netherlands / City: Doetinchem



Return to Community Support




Who is online

Users browsing this forum: No registered users and 111 guests

Board index

 
 
   
 
© 2014 Mixvibes