U-Mix Control Pro problem

   Discuss technical issues with the community. Mixvibes staff provides no support on this board.
Forum rules
Click here to join MIxvibes on DISCORD https://discord.gg/gMdQJ2cJqa

U-Mix Control Pro problem

Postby movteka on 06 May 2017, 10:07

Hello.

I have a problem vith my hardware- mixvibes U-Mix Control Pro. It started after Ive updated firmvare to v4.3.
When I connect the device PC It can not be seen as MIDI device, It cant be seen as flash usb (shift+browse as in instruction)
either. Ive tried 4 windows PCs to connect to with very same effect. Software is Cross. Bulbs on the device work correct,
they run on both decks on start up. Is it possible to somehow reset firmware on the device, or maybe send device to your technicians?

Seing for your reply in desper. Thanks in advance.
movteka
 
Posts: 6
Joined: 06 May 2017, 09:40


Re: U-Mix Control Pro problem

Postby daniel clark on 06 May 2017, 13:17

:cool: welcome too the fourm ,,
couple of issues and info needed ,,
in grey header at top of posting page are fourm rules ,, mainly to regerster the software licence key in the fourm ,,
:?: how where you able too access the firmware update ,,
:?: what was the reason for updating the firm ware
had u m c p 1 earlier on ,, are you sure its a 1 , the firm ware is not for a umcp2 ,,
cant remember the set up and procedure for updating it when i had it ,, but my limited computer skills was able to accomplish it ,,not saying you are inapt but might have misssed a step ,,
dont think mixvibes has resources to do the firmware update for you soo we will try to solve this as we can :cool:
Image
Image
January 2012 Mixvibes DJ of the month
MEMBER OF:
:cool: C00l People MV Society :cool:

PLEASE REGISTER YOUR SOFTWARE...FORUM RULES
2014 dell XPS8700
intel core i5 4400@3.10ghz
12 gigs DDR3 ram
NVDIA GeForce GT635
Win 10 /64 bits OS
Realteck 7.1
Home USB sound dogle
Asus VE247H monitor
Logitec G-15 ser 1 gaming keyboard
U-Mix Control Pro 2
User avatar
daniel clark
 
Posts: 6861
Joined: 31 Oct 2008, 01:01
Location: Charleston,S C


Re: U-Mix Control Pro problem

Postby daniel clark on 06 May 2017, 13:25

firm ware Capture.PNG
:eek: :idea: instructions for firmware
reason for asking about how you accessed it is because you should have been able to without registering ,,
will see your responses for the info as too how too proceed :cool:
You do not have the required permissions to view the files attached to this post.
Image
Image
January 2012 Mixvibes DJ of the month
MEMBER OF:
:cool: C00l People MV Society :cool:

PLEASE REGISTER YOUR SOFTWARE...FORUM RULES
2014 dell XPS8700
intel core i5 4400@3.10ghz
12 gigs DDR3 ram
NVDIA GeForce GT635
Win 10 /64 bits OS
Realteck 7.1
Home USB sound dogle
Asus VE247H monitor
Logitec G-15 ser 1 gaming keyboard
U-Mix Control Pro 2
User avatar
daniel clark
 
Posts: 6861
Joined: 31 Oct 2008, 01:01
Location: Charleston,S C


Re: U-Mix Control Pro problem

Postby movteka on 16 May 2017, 19:27

Thanks for reply.
Actions of update were direcly as in instruction.
Im in search of disc with serial.
Markings on bottom of the instrument are:
M1100075A, September 2011.
As soon as ill find my disc Ill enter serial in my profile, hope for your understanding.
Ive downloaded update using another profile, currently I do not have access to.
movteka
 
Posts: 6
Joined: 06 May 2017, 09:40


Re: U-Mix Control Pro problem

Postby daniel clark on 16 May 2017, 19:37

:cool: no problem ,,if you have u m c p 1 ,,not 2 then the firmware in the download section is correct ,, make sure its not the 2 ,, should be marked u m c p ,,
:?: was the unit functional before the firmware update ,,
:?: barring that the firmware up date was un sussful there are thing to check before suggesting trying that again ,,
will need info as to persicly whats going on /not going on ,,to determine if its another issue than firmware ,, sooo info and screen shots are necessary ,, at bottom of posting page is a upload attachment tab use this to put screen shots on fourm ,,
info needed screen shot of MIDI tab with controller connected ,,
os and system specs ,,
what you tried to do to get this resolved/working ,,as not to suggest something already tried ,,
and the process begins :mrgreen:
Image
Image
January 2012 Mixvibes DJ of the month
MEMBER OF:
:cool: C00l People MV Society :cool:

PLEASE REGISTER YOUR SOFTWARE...FORUM RULES
2014 dell XPS8700
intel core i5 4400@3.10ghz
12 gigs DDR3 ram
NVDIA GeForce GT635
Win 10 /64 bits OS
Realteck 7.1
Home USB sound dogle
Asus VE247H monitor
Logitec G-15 ser 1 gaming keyboard
U-Mix Control Pro 2
User avatar
daniel clark
 
Posts: 6861
Joined: 31 Oct 2008, 01:01
Location: Charleston,S C


Re: U-Mix Control Pro problem

Postby daniel clark on 16 May 2017, 19:55

preferences MIDI map U-Mix Control Pro 2 Capture.PNG
:eek: you posibly dont have the upload tab ,,userers right when regerstered ,,so here a screen shot of MIDI tab ,, its for U-Mix 2 and the on line tab is red because the controller is not connected , :cool:
You do not have the required permissions to view the files attached to this post.
Image
Image
January 2012 Mixvibes DJ of the month
MEMBER OF:
:cool: C00l People MV Society :cool:

PLEASE REGISTER YOUR SOFTWARE...FORUM RULES
2014 dell XPS8700
intel core i5 4400@3.10ghz
12 gigs DDR3 ram
NVDIA GeForce GT635
Win 10 /64 bits OS
Realteck 7.1
Home USB sound dogle
Asus VE247H monitor
Logitec G-15 ser 1 gaming keyboard
U-Mix Control Pro 2
User avatar
daniel clark
 
Posts: 6861
Joined: 31 Oct 2008, 01:01
Location: Charleston,S C


Re: U-Mix Control Pro problem

Postby movteka on 29 Jul 2017, 13:38

Sorry as it may look like necroposting.
Hardware was operational, usb cable is ok. The problem is that now device cann not be recognized by a PC.
For example, when i hold shiftbrowse and turn device on(source a, b blinking), midUpgDisc doesnt even show. Nothing happens at all. And on different pcs with Vista, 8, 8.1, 10 Windowses the story is the same. Please help mixvibes pimp my device :D
movteka
 
Posts: 6
Joined: 06 May 2017, 09:40


Re: U-Mix Control Pro problem

Postby RoJeC on 30 Jul 2017, 03:56

Which Cross product are you using and which version of it?
Ronald

Image

Manual alternative link: ? https://www.mixvibes.com/wp-content/uploads/2017/10/cross-dj-user-manual.pdf
Audio dropouts? Increase audio 'buffer size' value.
FAQ iOS / Android / PC / MAC http://www.mixvibes.com/help/
Soundcard not available/working? Try the 32bit version of Cross (is also installed).
RoJeC
 
Posts: 4926
Joined: 20 May 2011, 08:55
Location: Bussum, Netherlands


Re: U-Mix Control Pro problem

Postby movteka on 15 Aug 2017, 16:43

RoJeC wrote:Which Cross product are you using and which version of it?

Cross 3.0.1, CrossDjFree 3.2.4 also.
movteka
 
Posts: 6
Joined: 06 May 2017, 09:40


Re: U-Mix Control Pro problem

Postby RoJeC on 16 Aug 2017, 00:28

Cross Free doesn;t support MIDI.

If you register your license key you can upgrade Cross to 3.4.3. Would be the best start given the ancienity of your version.
Ronald

Image

Manual alternative link: ? https://www.mixvibes.com/wp-content/uploads/2017/10/cross-dj-user-manual.pdf
Audio dropouts? Increase audio 'buffer size' value.
FAQ iOS / Android / PC / MAC http://www.mixvibes.com/help/
Soundcard not available/working? Try the 32bit version of Cross (is also installed).
RoJeC
 
Posts: 4926
Joined: 20 May 2011, 08:55
Location: Bussum, Netherlands


Next

Return to Community Support




Who is online

Users browsing this forum: No registered users and 103 guests

Board index

 
 
   
 
© 2014 Mixvibes