mapping for behringer BCD 3000
Posted: 27 Jan 2017, 16:30
Hi has mapping been done for Behringer BCD3000 for Cross 3.4.2 as I am unable to find it on the listing under controllers
Closed forum. You can only use it as a source of information about MixVibes software
http://forum.mixvibes.com/
jonbow wrote:Hi
I have tried to do the mapping but have not been successful then I read the following in the Behringer manual .
"Data request for all moving elements".
If the "Data request " command(demand for data) is sent from a suitable software application to the BCD 3000 as "control change" command (100) on a MIDI channel 1 the B CONTROL transmits its current control settings to the MIDI or DJ application .
This affects all knobs and faders apart from both wheels and buttons"
My question is simple how do I request the Cross software to send the "Data request " to start this procedure?
many thanks for your help
<mappings>
<input-mappings>
<mapping>
<events>
<MIDI type="Note" parameter="0x43" channel="0x3"/>
</events>
<controls>
<control alias="fam(Player)[0x2].PlayPause"/>
</controls>
<preset name="Toggler Button">
<parameters>
<parameter object="invert" key="on" value="off"/>
</parameters>
</preset>
</mapping>
<output-mappings>
<device-event name="StateRequest">
<MIDI type="CC" parameter="0x100" channel="0x1" value="0x100"/>
</device-event>