Page 1 of 1

How to record mix?

PostPosted: 04 Apr 2016, 14:31
by felipegonzo
Hi there, i have bought the xone 23c which came with the Cross LE software , i have set record input to channel A,B and Mix but when i checked the recording folder it only recorded channel A and B not the MIX....!!! Any Solutions? Thanks

Re: How to record mix?

PostPosted: 04 Apr 2016, 15:33
by jaymarkus
I think it is only possible if you are using an Midicontroller

Re: How to record mix?

PostPosted: 04 Apr 2016, 17:28
by RoJeC
Jaymarkus is somewhat right.

In other words :
When using an external mixer there is no mix for Cross.

An alternative could be to have an additional output of your mixer send to aux in of your PC/mac.
But you need the right connections to be able to do it like this.

Re: How to record mix?

PostPosted: 07 Jan 2018, 21:44
by Charly82
Hi Rojec,

Replying on this because I have the same issue.

iMac with latest version of Cross and setup in HID mode.
DJM750 over USB to Imac
and 2x CDJ850 over USB to Imac

What else is required to get the mix recorded (in the best sound quality)?

Many thanks for your support,

regards Charly