Page 1 of 1
(SOLVED) HELP OUTPUT NOT CONNECTED???
Posted:
10 Feb 2012, 19:57
by dnbalex
I have been running U-Mix 44 with mixvibes DVS for about 3 or 4 months, iv moved it around to different house etc and it all worked fine. i have moved everything back home and it wont recognise the audio outputs, its just says not connected!
i have gone into the windows audio options and tested the soundcard and both channels work on the mixer, so it is just mixvibes that wont work.
help anyone?
thanks
Re: HELP OUTPUT NOT CONNECTED???
Posted:
10 Feb 2012, 20:06
by dnbalex
here is my config setting
Config 2012/02/10 18:06
OS= Service Pack 1 build=7601 processor=PROCESSOR_IDENTIFIER=AMD64 Family 16 Model 6 Stepping 3, AuthenticAMD
MixVibes DVS version=7.400 DLL langage=US version=7.400
System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=Yes
MultiInstance=No
General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes
Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=70 max=200
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No
Sound Configuration
--------------------
Nb Sound=1 Nb Mixer=0
Managment Type ASIO
Device=MixvibesAsioUMix44 AsioVersion=0 DriverVersion=2
Latency=47 Driver sampling=44100 Nb Input=4 Nb Output=2
Managment Type ASIO
1-Not Connected 1 2-Not Connected 2
Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:U-MIX44 Sound Device 1-U-MIX44 Sound Device 2
Mode=all relative
Riaa=Yes Preamp Left=39 db Preamp Right=40 db Noise Filter=0 Hz
45T=Yes InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db
Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms
Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=100.000 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=1.039 Speed Average(1s)=1.041 Speed Average(3s)=1.041
Vinyl2 connected=vinyl version 2
Audio=ASIO source=2:U-MIX44 Sound Device 3-U-MIX44 Sound Device 4
Mode=all relative
Riaa=Yes Preamp Left=35 db Preamp Right=35 db Noise Filter=0 Hz
45T=Yes InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db
Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms
Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=71.209 Volume max left=0.368 Volume max right=0.368 Volume optimum=0.370
Speed Average(100ms)=0.076 Speed Average(1s)=0.074 Speed Average(3s)=0.083
Vinyl 3 not connected
Vinyl 4 not connected
Re: HELP OUTPUT NOT CONNECTED???
Posted:
10 Feb 2012, 20:29
by Blackbrook
dnbalex wrote:Sound Configuration
--------------------
Nb Sound=1 Nb Mixer=0
Managment Type ASIO
Device=MixvibesAsioUMix44 AsioVersion=0 DriverVersion=2
Latency=47 Driver sampling=44100 Nb Input=4 Nb Output=2
Managment Type ASIO
1-Not Connected 1 2-Not Connected 2
There seems to be something wrong with the driver. Did you plug it into the usb port at which you have installed it to?
Re: HELP OUTPUT NOT CONNECTED???
Posted:
10 Feb 2012, 20:35
by dnbalex
yeh everything is exactly the same as it always has been, i have tried pluggin in my mates computer with mixvibes and it works, so it must be something with the computer. i am now re-instaalin to see if that works, but iv already tried this and it was exactly the same :s
Re: HELP OUTPUT NOT CONNECTED???
Posted:
10 Feb 2012, 20:53
by dnbalex
still doing the same thing
Re: HELP OUTPUT NOT CONNECTED???
Posted:
11 Feb 2012, 12:10
by Blackbrook
Did you do a clean reinstallation including cleaning the registry and installing it to a totally different location on your harddisk?
Re: HELP OUTPUT NOT CONNECTED???
Posted:
11 Feb 2012, 13:09
by UncleVibes
DVS closed try to reset mixvibes: reset.exe DVS folder. Detail now your latency in your report is very very high. Also do windows use the sound card by default? You must not.
Re: HELP OUTPUT NOT CONNECTED???
Posted:
25 Feb 2012, 21:36
by dnbalex
i managed to sort this out. the settings in my windows audio devices had changed the output to microphone????? i dont know why but this issue has been resolved thanks for your help