Cross:: serial issue

   Discuss technical issues with the community. Mixvibes staff provides no support on this board.
Forum rules
Click here to join MIxvibes on DISCORD https://discord.gg/gMdQJ2cJqa

Re: Cross:: serial issue

Postby Kriztov on 04 Jan 2010, 20:31

Still no fix for this problem?
User avatar
Kriztov
 
Posts: 29
Joined: 31 Mar 2008, 10:18


Re: Cross:: serial issue

Postby hemskoc on 04 Jan 2010, 20:39

Kriztov wrote:Still no fix for this problem?

*Did you try Blackbrooks solution (see previous post) to the serial problem?
*Do you have UAC ( user access control enabled )? if so turn it off
Vista and windows 7 has UAC which blocks applications among other things that it does not see as trusted therefor settings etc are not written to the registry(so u have to put in your serial EVERY BOOT UP!)
*Have you tried a partitioned a section of your Hard drive(say 18-20 gig) to run JUST MIXVIBES and minimal drivers? (works for me using an old version of XP with no problems whatsoever)
Hope this helps Kriztov
Cheers
Please Register software serial# before asking for help on the forum
(User Control Panel>Profile>Serial#)


ASUS i7 ROG G51,4G ram
Samsung 256gSSD +320g Dual HD's
Edirol FA66 FWire @ 48.kHz + U46 MK2
U-Mix Control Pro 2
Korg PadKontrol
Numark DXM06
Technics 1200 mkII X 2
Ortofon Digiscratch carts
Tapco Thump Powered Monitors
HD 25 cans

MEMBER OF:
:cool: c00l People MV Society :cool:
User avatar
hemskoc
 
Posts: 640
Joined: 30 Jul 2004, 10:18
Location: Sawtell, NSW, Australia


Re: Cross:: serial issue

Postby Kriztov on 25 Jan 2010, 22:44

Turned UAC off, this went well for a couple sessions, today it asked for the serial again... :cry: :cry: :cry:

And also another bug. I found out that that sometimes the playback of a track that is loaded in a deck, has a minor glitch in it. Most of the time somewhere in the first 30second of the track. When you just listen to the track, you almost never really hear it, but you notice it hard during beatmatching the track.
When I have this glitch in a track, I have to load another track, than I load the same track again (the one were the glitch was in) and TA-DAA, the glitch is gone! :confused: :confused:

Any help?
User avatar
Kriztov
 
Posts: 29
Joined: 31 Mar 2008, 10:18


Re: Cross:: serial issue

Postby hemskoc on 25 Jan 2010, 22:55

Hey mate...
The only other thing i can think of is to try out the partition Idea i suggested before. :(
This remedied almost all of my problems i had previously.
Put in XP on that partition, not Vista....
Cheers
Last edited by hemskoc on 25 Jan 2010, 22:57, edited 1 time in total.
Please Register software serial# before asking for help on the forum
(User Control Panel>Profile>Serial#)


ASUS i7 ROG G51,4G ram
Samsung 256gSSD +320g Dual HD's
Edirol FA66 FWire @ 48.kHz + U46 MK2
U-Mix Control Pro 2
Korg PadKontrol
Numark DXM06
Technics 1200 mkII X 2
Ortofon Digiscratch carts
Tapco Thump Powered Monitors
HD 25 cans

MEMBER OF:
:cool: c00l People MV Society :cool:
User avatar
hemskoc
 
Posts: 640
Joined: 30 Jul 2004, 10:18
Location: Sawtell, NSW, Australia


Re: Cross:: serial issue

Postby Kriztov on 25 Jan 2010, 22:57

hemskoc wrote:*Have you tried a partitioned a section of your Hard drive(say 18-20 gig) to run JUST MIXVIBES and minimal drivers? (works for me using an old version of XP with no problems whatsoever)
Hope this helps Kriztov
Cheers


Little help with this please...
I'm running Win Vista, so I have to make a partitioned section of my hard drive. And what do I have to install on this partition? Win XP?
Grtzz
User avatar
Kriztov
 
Posts: 29
Joined: 31 Mar 2008, 10:18


Re: Cross:: serial issue

Postby hemskoc on 25 Jan 2010, 22:58

well you dont have to put on xp on the partion, its just my personal suggestion. Vista works fine for the majority of users :) (although it is not working for you at the moment; thats why i suggested XP-i have not used 7 either, but XP works). Just make sure on the partition, there are minimal drivers installed(graphics,soundcard), and it NEVER connects to the internet.
Cheers
Please Register software serial# before asking for help on the forum
(User Control Panel>Profile>Serial#)


ASUS i7 ROG G51,4G ram
Samsung 256gSSD +320g Dual HD's
Edirol FA66 FWire @ 48.kHz + U46 MK2
U-Mix Control Pro 2
Korg PadKontrol
Numark DXM06
Technics 1200 mkII X 2
Ortofon Digiscratch carts
Tapco Thump Powered Monitors
HD 25 cans

MEMBER OF:
:cool: c00l People MV Society :cool:
User avatar
hemskoc
 
Posts: 640
Joined: 30 Jul 2004, 10:18
Location: Sawtell, NSW, Australia


Re: Cross:: serial issue

Postby Kriztov on 25 Jan 2010, 23:07

Sorry but I'm not very familiar with this kinda stuff...
So just make another partition, install Vista, drivers and Cross? And do I have to boot up in this new partition? Or how does that work?
User avatar
Kriztov
 
Posts: 29
Joined: 31 Mar 2008, 10:18


Re: Cross:: serial issue

Postby hemskoc on 25 Jan 2010, 23:21

Kriztov wrote:Sorry but I'm not very familiar with this kinda stuff...
So just make another partition, install Vista, drivers and Cross? And do I have to boot up in this new partition? Or how does that work?

No problem...Well for example, i used a program called 'partition magic'. It will make a partition based on your preferences you enter(eg. 18-20 gig should be adequate if you have the HD space.) It will preserve the original 'C:' drive, and will create a new additional letter 'virtual' drive (i labeled mine 'M:' for Mixvibes-easy to remember) ;)
*Yeah make sure you install vista on the correct partition drive letter, and Cross, graphics, soundcard drivers ect.
*When you start up your PC, a window should pop up asking which operating system you wish to 'boot'. Should be that easy ;)
*(the only thing is they might be both labeled 'Vista'. The new partition should be the 'lower' one on the selection tree.)
Good luck...also have a google about partitioning if you need more information.
Cheers
Please Register software serial# before asking for help on the forum
(User Control Panel>Profile>Serial#)


ASUS i7 ROG G51,4G ram
Samsung 256gSSD +320g Dual HD's
Edirol FA66 FWire @ 48.kHz + U46 MK2
U-Mix Control Pro 2
Korg PadKontrol
Numark DXM06
Technics 1200 mkII X 2
Ortofon Digiscratch carts
Tapco Thump Powered Monitors
HD 25 cans

MEMBER OF:
:cool: c00l People MV Society :cool:
User avatar
hemskoc
 
Posts: 640
Joined: 30 Jul 2004, 10:18
Location: Sawtell, NSW, Australia


Re: Cross:: serial issue

Postby Support@MixVibes on 26 Jan 2010, 12:14

Kriztov wrote:Still no fix for this problem?

There is 1.3.2 since December 24th, still not working ?
How many users account do you have ?
You're supposed to install Cross with admin rights and use it in the same session (install to all users don't work).
User avatar
Support@MixVibes
 


Re: Cross:: serial issue

Postby Kriztov on 26 Jan 2010, 14:08

I think only one user account. When I boot up, I don't have to choose which user, it goes directly to the desktop. So I guess I'm the admin...
UAC is also off, it is Cross 1.3.2, but it still sometimes asks for the serial. Weird...
User avatar
Kriztov
 
Posts: 29
Joined: 31 Mar 2008, 10:18


PreviousNext

Return to Community Support




Who is online

Users browsing this forum: No registered users and 112 guests

Board index

 
 
   
 
© 2014 Mixvibes