New Korg Zero 8 MIDI config
Posted: 20 Dec 2009, 03:36Hi MixVibes Community
Here is a new version of my Korg Zero 8 MIDI Config
Dont forget to update your Zero 8 Controller Banks!!!
Here is a new version of my Korg Zero 8 MIDI Config
Dont forget to update your Zero 8 Controller Banks!!!
Channel
You have to setup a Zero8 Controller Bank like this:
(If you want to use your own MIDI Channels and CC numbers
you have to adjust the DVS config too)
Num. Min Max MidiCh Behavoir
Knob1 1 0 127 1 rel.
Knob2 2 0 127 1 rel.
Knob3 3 0 127 1 rel.
Knob4 4 0 127 1 rel.
Knob5 5 0 127 1 rel.
Knob6 6 0 127 1 rel.
Knob7 7 0 127 1 rel.
Knob8 8 0 127 1 rel.
Num. OffVal OnVal MidiCh Type Behavoir
Sw1 9 0 127 1 cc tog.
Sw2 10 0 1 1 cc mom.
Sw3 11 1 127 1 cc tog.
Sw4 12 1 127 1 cc tog.
Sw5 13 0 127 1 cc tog.
Sw6 14 0 127 1 cc tog.
Sw7 15 0 127 1 cc mom.
Sw8 16 1 1 1 cc tog.
Num. Min Max MidiCh Type Behavoir
X 17 0 2 1
Y 18 0 10 1
Touch 19 0 1 1 cc tog.
This are the functions
Turn Left/ Turn Right / Push
Knob1 decrement Loop Beat/ increment Loop Beat/ activate Loop, push again to restart Loop immediately
Konb2 dec. Key/ inc. Key/ reset Key
Knob3 select Rel Abs Mode/ select Rel Abs Mode/ Vinyl Mode on/off
Knob4 scroll down/ scrolls up/ switch Explorer/Playlist/Mediabase
Knob5 move Loop backward/ move Loop forward/ deactivate Loop, Play
Knob6 decrement Speed/ increment Speed/
Knob7 push and hold: enable save location mode
Knob8 load Track into Player1/ load Track into Player2/
TouchPad X-Axis Y-Axis
Hotcue 1-4 HotLoop 1-3 -
Sampler
Set up a Zero 8 control bank like this:
Num. Min Max MidiCh Behavoir
Knob1 21 0 127 1 rel.
Knob2 22 0 127 1 rel.
Knob3 23 0 127 1 rel.
Knob4 24 0 127 1 rel.
Knob5 25 1 5 1 rel.
Knob6 26 0 127 1 rel.
Knob7 27 0 127 1 rel.
Knob8 28 0 127 1 rel.
Num. OffVal OnVal MidiCh Type Behavoir
Sw1 29 1 127 1 cc tog.
Sw2 30 0 127 1 note mom.
Sw3 31 1 127 1 note mom.
Sw4 32 1 127 1 note mom.
Sw5 33 0 1 1 note mom.
Sw6 34 0 1 1 cc mom.
Sw7 35 0 1 1 cc mom.
Sw8 36 1 1 1 cc mom.
This are the functions
Turn Left/ Turn Right / Push
Knob1 select Send action/ select Send action/ Send to active Sampler
Konb2 select Bankkey preset / select Bankkey preset/ enable Bankkey mode
Knob3 select Bankbeat preset/ select Bankbeat preset/ enablet Bankbeat mode
Knob4 select Bankslice preset/ select Bankslice preset/ enable Bankslice mode
Knob5 select active sampler/ select active sampler/ deactivate Loop, Play
Knob6 select play mode/ select play mode/ loop on/off
Knob7 decrement volume/ increment volume/ mute on/off
Knob8 decrement pitch / increment pitch/ hold on/off
FURTHER VERSIONS WILL FOLLOW
Please let me know if you have any suggestions!
CONTACT: dj_marxon@primacom.net
ICQ: 442 965 775
Here is a new version of my Korg Zero 8 MIDI Config
Dont forget to update your Zero 8 Controller Banks!!!
Here is a new version of my Korg Zero 8 MIDI Config
Dont forget to update your Zero 8 Controller Banks!!!
Channel
You have to setup a Zero8 Controller Bank like this:
(If you want to use your own MIDI Channels and CC numbers
you have to adjust the DVS config too)
Num. Min Max MidiCh Behavoir
Knob1 1 0 127 1 rel.
Knob2 2 0 127 1 rel.
Knob3 3 0 127 1 rel.
Knob4 4 0 127 1 rel.
Knob5 5 0 127 1 rel.
Knob6 6 0 127 1 rel.
Knob7 7 0 127 1 rel.
Knob8 8 0 127 1 rel.
Num. OffVal OnVal MidiCh Type Behavoir
Sw1 9 0 127 1 cc tog.
Sw2 10 0 1 1 cc mom.
Sw3 11 1 127 1 cc tog.
Sw4 12 1 127 1 cc tog.
Sw5 13 0 127 1 cc tog.
Sw6 14 0 127 1 cc tog.
Sw7 15 0 127 1 cc mom.
Sw8 16 1 1 1 cc tog.
Num. Min Max MidiCh Type Behavoir
X 17 0 2 1
Y 18 0 10 1
Touch 19 0 1 1 cc tog.
This are the functions
Turn Left/ Turn Right / Push
Knob1 decrement Loop Beat/ increment Loop Beat/ activate Loop, push again to restart Loop immediately
Konb2 dec. Key/ inc. Key/ reset Key
Knob3 select Rel Abs Mode/ select Rel Abs Mode/ Vinyl Mode on/off
Knob4 scroll down/ scrolls up/ switch Explorer/Playlist/Mediabase
Knob5 move Loop backward/ move Loop forward/ deactivate Loop, Play
Knob6 decrement Speed/ increment Speed/
Knob7 push and hold: enable save location mode
Knob8 load Track into Player1/ load Track into Player2/
TouchPad X-Axis Y-Axis
Hotcue 1-4 HotLoop 1-3 -
Sampler
Set up a Zero 8 control bank like this:
Num. Min Max MidiCh Behavoir
Knob1 21 0 127 1 rel.
Knob2 22 0 127 1 rel.
Knob3 23 0 127 1 rel.
Knob4 24 0 127 1 rel.
Knob5 25 1 5 1 rel.
Knob6 26 0 127 1 rel.
Knob7 27 0 127 1 rel.
Knob8 28 0 127 1 rel.
Num. OffVal OnVal MidiCh Type Behavoir
Sw1 29 1 127 1 cc tog.
Sw2 30 0 127 1 note mom.
Sw3 31 1 127 1 note mom.
Sw4 32 1 127 1 note mom.
Sw5 33 0 1 1 note mom.
Sw6 34 0 1 1 cc mom.
Sw7 35 0 1 1 cc mom.
Sw8 36 1 1 1 cc mom.
This are the functions
Turn Left/ Turn Right / Push
Knob1 select Send action/ select Send action/ Send to active Sampler
Konb2 select Bankkey preset / select Bankkey preset/ enable Bankkey mode
Knob3 select Bankbeat preset/ select Bankbeat preset/ enablet Bankbeat mode
Knob4 select Bankslice preset/ select Bankslice preset/ enable Bankslice mode
Knob5 select active sampler/ select active sampler/ deactivate Loop, Play
Knob6 select play mode/ select play mode/ loop on/off
Knob7 decrement volume/ increment volume/ mute on/off
Knob8 decrement pitch / increment pitch/ hold on/off
FURTHER VERSIONS WILL FOLLOW
Please let me know if you have any suggestions!
CONTACT: dj_marxon@primacom.net
ICQ: 442 965 775