Korg Zero 8 MIDI File
Posted: 04 Nov 2009, 20:54Hi MixVibes Community!
I finished a MIDI config for my new Korg Zero8.
Because the many ways of doing everything it was hard to decide
which features to use and how to control them.
But i like it "compact" and have put all together in one single Controler Bank.
For everything else i use another Controller Bank which controls
my mouse.
Please let me know if you have any suggestions!
So here is my first approach:
You have to setup a Zero8 Controller Bank like this:
(If you want to use your own MIDI Channels and CC numbers
you have to adjust the DVS config too)
Num. Min Max MidiCh Behavoir
Knob1 1 0 127 1 rel.
Knob2 2 0 127 1 rel.
Knob3 3 0 127 1 rel.
Knob4 4 0 127 1 rel.
Knob5 5 0 127 1 rel.
Knob6 6 0 127 1 rel.
Knob7 7 0 127 1 rel.
Knob8 8 0 127 1 rel.
Num. OffVal OnVal MidiCh Type Behavoir
Sw1 9 0 127 1 cc tog.
Sw2 10 0 1 1 cc mom.
Sw3 11 0 1 1 cc mom.
Sw4 12 0 127 1 cc tog.
Sw5 13 0 127 1 cc tog.
Sw6 14 0 127 1 cc tog.
Sw7 15 0 127 1 cc tog.
Sw8 16 0 1 1 cc mom.
Num. Min Max MidiCh Type Behavoir
X 17 0 26 1
Y 18 0 10 1
Touch 19 0 1 1 cc tog.
Here are the functions:
--------------------NOTE ----------------------------------------------
I programmed every Encoder "speed sensitive"
Turn it with low speed for precice inputs.
Turn it fast to jump with greater values
Turn Left /Turn Right /Push
Knob1
decrement Loop Beat / increment Loop Beat / activate Loop, push again to restart Loop immediately
Konb2
dec. Key/ inc. Key/ reset Key
Knob3
enable Vinyl Mode/ switch RelAbs Mode/ Push and hold: SaveLocation Mode
Knob4
scroll down/ scrolls up/ switch Explorer/Playlist/Mediabase
Knob5
move Loop backward/ move Loop forward/ deactivate Loop, Play
Knob6 nothing
Knob7 nothing
Knob8
load Track into/ Player1 load Track into Player2/ toggle (select) Player 1/2
The TouchPad X-Axis controls Hutcue1-4 and Hotloop1-3
FURTHER VERSION WILL FOLLOW
contact:
dj_marxon@primacom.net
icq: 442965775
http://www.file-upload.net/download-198 ... 8.rar.html
I finished a MIDI config for my new Korg Zero8.
Because the many ways of doing everything it was hard to decide
which features to use and how to control them.
But i like it "compact" and have put all together in one single Controler Bank.
For everything else i use another Controller Bank which controls
my mouse.
Please let me know if you have any suggestions!
So here is my first approach:
You have to setup a Zero8 Controller Bank like this:
(If you want to use your own MIDI Channels and CC numbers
you have to adjust the DVS config too)
Num. Min Max MidiCh Behavoir
Knob1 1 0 127 1 rel.
Knob2 2 0 127 1 rel.
Knob3 3 0 127 1 rel.
Knob4 4 0 127 1 rel.
Knob5 5 0 127 1 rel.
Knob6 6 0 127 1 rel.
Knob7 7 0 127 1 rel.
Knob8 8 0 127 1 rel.
Num. OffVal OnVal MidiCh Type Behavoir
Sw1 9 0 127 1 cc tog.
Sw2 10 0 1 1 cc mom.
Sw3 11 0 1 1 cc mom.
Sw4 12 0 127 1 cc tog.
Sw5 13 0 127 1 cc tog.
Sw6 14 0 127 1 cc tog.
Sw7 15 0 127 1 cc tog.
Sw8 16 0 1 1 cc mom.
Num. Min Max MidiCh Type Behavoir
X 17 0 26 1
Y 18 0 10 1
Touch 19 0 1 1 cc tog.
Here are the functions:
--------------------NOTE ----------------------------------------------
I programmed every Encoder "speed sensitive"
Turn it with low speed for precice inputs.
Turn it fast to jump with greater values
Turn Left /Turn Right /Push
Knob1
decrement Loop Beat / increment Loop Beat / activate Loop, push again to restart Loop immediately
Konb2
dec. Key/ inc. Key/ reset Key
Knob3
enable Vinyl Mode/ switch RelAbs Mode/ Push and hold: SaveLocation Mode
Knob4
scroll down/ scrolls up/ switch Explorer/Playlist/Mediabase
Knob5
move Loop backward/ move Loop forward/ deactivate Loop, Play
Knob6 nothing
Knob7 nothing
Knob8
load Track into/ Player1 load Track into Player2/ toggle (select) Player 1/2
The TouchPad X-Axis controls Hutcue1-4 and Hotloop1-3
FURTHER VERSION WILL FOLLOW
contact:
dj_marxon@primacom.net
icq: 442965775
http://www.file-upload.net/download-198 ... 8.rar.html