Bypass (Vinyl) mode output distorts(HELP)

[dj flipside]

Hi I'm am new to the whole DVS system and have slowly worked through some initial problems getting the Ultimate DVS package to work. I am confident that all connections are correct as at various stages I have had clear sound being output through. I am using 2 Stanton ST-150 turntables with a Pioneer DJM 700 and U-Mix 44 SC connected to PC running windows XP. I have optimised the performance of PC and updated the U-Mix 44 driver in order to get everything finally working.
When I am using the timecode vinyl the output through the speakers sounds good (had some initial problems with low volume output but think it is now ok). The issue is when I switch to bypass mode and use regular vinyl the sound is distorted because the gain seems too high and it is maxing out.
Any help would be great. Sorry for the long dribble

[Marxon]

Deactivate RIAA in the Vinyl settings.

[dj flipside]

Thanks for your response. I am not sure how to deactivate RIAA although checking the config report I think it is already off. I have played around with the settings and the timecode vinyl sounds perfect but then on bypass mode it sounds extremely bassy and the highs and mids are muffled. Any ideas?

Config 2014/03/04 13:50

OS=Microsoft Windows XP Service Pack 3 build=2600 processor=PROCESSOR_IDENTIFIER=x86 Family 15 Model 4 Stepping 9, GenuineIntel
MixVibes DVS version=7.400 DLL langage=US version=7.400

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=Yes
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=120 max=190
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=Yes Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=MixvibesAsioUMix44 AsioVersion=0 DriverVersion=2
Latency=12 Driver sampling=44100 Nb Input=4 Nb Output=4
Managment Type ASIO
1-U-MIX44 Sound Device 1 2-U-MIX44 Sound Device 2
3-U-MIX44 Sound Device 3 4-U-MIX44 Sound Device 4

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:U-MIX44 Sound Device 1-U-MIX44 Sound Device 2
Mode=all relative
Riaa=No Preamp Left=10 db Preamp Right=10 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.000 Volume max left=0.000 Volume max right=18245943769665491000000000000000000.000 Volume optimum=0.000
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl2 connected=vinyl version 2
Audio=ASIO source=2:U-MIX44 Sound Device 3-U-MIX44 Sound Device 4
Mode=absolute
Riaa=No Preamp Left=8 db Preamp Right=8 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=100.000 Volume max left=0.379 Volume max right=0.379 Volume optimum=0.370
Speed Average(100ms)=0.997 Speed Average(1s)=0.999 Speed Average(3s)=0.998


Vinyl 3 not connected
Vinyl 4 not connected