MIXVIBES Dj Community old forum

Closed forum. You can only use it as a source of information about MixVibes software
http://forum.mixvibes.com/

I'm new some help please!

http://forum.mixvibes.com/viewtopic.php?f=350&t=26530

Page 1 of 2

I'm new some help please!

PostPosted: 11 Jan 2013, 14:30
by djdeiva
Hi,
I'm new in mixvibes.
So i have some problems at the time to mixing with mi external cdj, for example sometimes when I pulse play the song goes to another point i had cathced and started in another point that i don't want.
Another problem that i have are the loops with de external cdj too.
If anyone can tell me any solutions, he will do me happy jajaja.

Thanks, I'm spanish so sorry if there is any mistake in the message.

Re: I'm new some help please!

PostPosted: 11 Jan 2013, 14:30
by djdeiva
I use MixVibes 7 with u-mix44

Re: I'm new some help please!

PostPosted: 11 Jan 2013, 15:30
by Hannes
Do you use MIDI or timecode?

Re: I'm new some help please!

PostPosted: 11 Jan 2013, 18:49
by djdeiva
I use timecode.
My external cdj akiyama 250mps and my external mixer behringer vmx 200 usb.

Re: I'm new some help please!

PostPosted: 11 Jan 2013, 20:02
by Marxon
Hi djdeiva,
djdeiva wrote:Thanks, I'm spanish so sorry if there is any mistake in the message.

No problem, my english could be better ,too :D
Is the timecode quality (in mixvibes settings) ok?
Also dont use master tempo function on your cdj.
Can you please post some screenshots from your MixVibes settings.
Maybe we can "see" the problem :mrgreen:


Best regards
Marxon

Re: I'm new some help please!

PostPosted: 11 Jan 2013, 20:27
by Hannes
relative or absolute mode?

Re: I'm new some help please!

PostPosted: 11 Jan 2013, 21:38
by djdeiva
It's in absolute mode.
And the timecode quality it's in 100% but only when the track is running.
I'm not at home now, so when I arrived I get a screenshoot and show it.
Thanks.

Re: I'm new some help please!

PostPosted: 12 Jan 2013, 00:39
by Hannes
when you´re in absolute mode the timecode position is the track position.

i.e. you play a song till 2,30min, then load another song and press play again the new song will play from 2,30min.

Re: I'm new some help please!

PostPosted: 12 Jan 2013, 15:39
by djdeiva
so, how can I do that if i'm in absolute that when i load another track start in 0,0s. Or there is another mode for this ?

about the picture, the timecode quality is in 0% but at the moment i play the track it goes to 100%.
I send you my configreport, look it and if you advice some problem tell me.

Thanks.

Re: I'm new some help please!

PostPosted: 12 Jan 2013, 15:40
by djdeiva
Config Report:
Config 2013/01/12 14:33

OS= build=7600 processor=PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 2, GenuineIntel
MixVibes DVS version=7.400 DLL langage=US version=7.400

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=No Equalization bypass=Yes
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=Yes Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=No AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=MixvibesAsioUMix44 AsioVersion=0 DriverVersion=2
Latency=12 Driver sampling=44100 Nb Input=4 Nb Output=4
Managment Type ASIO
1-U-MIX44 Sound Device 1 2-U-MIX44 Sound Device 2
3-U-MIX44 Sound Device 3 4-U-MIX44 Sound Device 4

Vinyl Configuration
--------------------
Vinyl1 connected=CD
Audio=ASIO source=0:U-MIX44 Sound Device 1-U-MIX44 Sound Device 2
Mode=absolute
Riaa=No Preamp Left=20 db Preamp Right=20 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.000 Volume max left=582810835607072330000000000000000.000 Volume max right=0.000 Volume optimum=62984375707008762000.000
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl2 connected=CD
Audio=ASIO source=2:U-MIX44 Sound Device 3-U-MIX44 Sound Device 4
Mode=absolute
Riaa=No Preamp Left=20 db Preamp Right=20 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.000 Volume max left=582810835607072330000000000000000.000 Volume max right=0.000 Volume optimum=62984375707008762000.000
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl 3 not connected
Vinyl 4 not connected
All times are UTC + 1 hour [ DST ]
Page 1 of 2
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/