need help ,midicontroller to connect it with mixvibes(so

[sub_sur]

hi, i bought a akai mpk mini professional,
it has the drumpads and oscillators to control all the parameters

my question is how do you connect it with mixvibes DVS ultimatum ?
cant figure it out , could someone help me with it ?

this is my recent configuration report of my set-up


Config 2012/05/14 16:00

OS= build=7600 processor=PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 23 Stepping 10, GenuineIntel
MixVibes DVS version=7.400 DLL langage=US version=7.400

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=No
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=No AutoGain=No AutoBpm at Load=No
Display Pitch=No Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=No Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=MixvibesAsioUMix44 AsioVersion=0 DriverVersion=2
Latency=6 Driver sampling=44100 Nb Input=4 Nb Output=4
Managment Type ASIO
1-U-MIX44 Sound Device 3 2-U-MIX44 Sound Device 4
3-U-MIX44 Sound Device 1 4-U-MIX44 Sound Device 2

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:U-MIX44 Sound Device 1-U-MIX44 Sound Device 2
Mode=absolute
Riaa=Yes Preamp Left=28 db Preamp Right=24 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.012 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl2 connected=vinyl version 2
Audio=ASIO source=2:U-MIX44 Sound Device 3-U-MIX44 Sound Device 4
Mode=absolute
Riaa=Yes Preamp Left=28 db Preamp Right=22 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl 3 not connected
Vinyl 4 not connected

[wazza]

plug the mpk mini into laptop by usb ...

go to mixvibes MIDI controller page ( go prefencer / options/ MIDI )...
in MIDI page ...MIDI input 1 ...you will see device drop-down box
click the drop-down to see if mixvibes see the mpk mini MIDI controller driver ...if you see akai mpk or USB device your OK..

now... down the bottom off the MIDI input 1 you will see " NEW box "....click new & name it akai mpk mini to make new MIDI map for your controller

now ...use the MIDI learn ( go prefencer/ learning ) to MIDI map the buttons , knobs on your MIDI controller to what you need tham to do in the software



also in view, click on info tab ,this will help with MIDI mapping because you can see what MIDI cc & MIDI note & MIDI channel your mpk mini is sending ....

[sub_sur]

thnx for the advice its finally working

cheers

[daniel clark]

glad to hear,,if you get the oppunity and want to share your mapping ,,post it on this topic,, also maybe some karma for wazza,,,will mark this as solved