MIXVIBES Dj Community old forum

i bought the DVS Ultimate mixbvibes, have problems with installation wizard of my U-Mix44 , keep asking to put a cdrom with windows xp professional , i do have windows xp , so dont know how to figure it out, that's why im not getting connections with input and output

can someone help me ? grtz

Forum Rules,

Please regirster your serial - User Control Panel > Profile

Once this is done, help will be offered

Jim B wrote:Forum Rules,

Please regirster your serial - User Control Panel > Profile

Once this is done, help will be offered

where can i find my serial ?

Normal the serial is found on the CD sleeve/Cover

Jim B wrote:Normal the serial is found on the CD sleeve/Cover

i submitted my serial , can anyone help me, i completed the installation of my soundcard i think , dont have a icon on my desktop of the graphic equalizer , do i have to upgrade my card from the website ?

I would, just to make sure that you have the latest driver installed.

[PC] [WIN XP, VISTA, SEVEN] U-MIX44 1.0.4

Latest release is 1.0.4. You may have the 1.0.1 release.

Jim B wrote:I would, just to make sure that you have the latest driver installed.

[PC] [WIN XP, VISTA, SEVEN] U-MIX44 1.0.4

Latest release is 1.0.4. You may have the 1.0.1 release.

thnx installed it , there is still a problem i have with my input no connection but with the output i have a signal , cant figure it out

Hey,

what are you using? CD or Vinyl? can you see at DVS at the vinyl control the signal in the little box?

Could you please post a config report when everything is running also the vinylcrontol systems (CD or Vinyl) and post it here.

regards
Christian

christiankoopmann wrote:Hey,

what are you using? CD or Vinyl? can you see at DVS at the vinyl control the signal in the little box?

Could you please post a config report when everything is running also the vinylcrontol systems (CD or Vinyl) and post it here.

regards
Christian

hi, im using vynil, i just see a signal in my output of 1 and 2
second player of my software isnt responding to my second turntable

here is the configuration i just did like you said


Config 2011/11/06 19:12

OS=Microsoft Windows XP Service Pack 2 build=2600 processor=PROCESSOR_IDENTIFIER=x86 Family 15 Model 3 Stepping 4, GenuineIntel
MixVibes DVS version=7.400 DLL langage=US version=7.400

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=No
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=No AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=100
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=MixvibesAsioUMix44 AsioVersion=0 DriverVersion=2
Latency=6 Driver sampling=44100 Nb Input=4 Nb Output=4
Managment Type ASIO
1-U-MIX44 Sound Device 1 2-U-MIX44 Sound Device 2
3-U-MIX44 Sound Device 3 4-U-MIX44 Sound Device 4

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:U-MIX44 Sound Device 1-U-MIX44 Sound Device 2
Mode=relative time
Riaa=Yes Preamp Left=32 db Preamp Right=26 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=91.535 Volume max left=0.634 Volume max right=0.634 Volume optimum=0.370
Speed Average(100ms)=0.999 Speed Average(1s)=1.000 Speed Average(3s)=1.000


Vinyl2 connected=vinyl version 2
Audio=ASIO source=0:U-MIX44 Sound Device 1-U-MIX44 Sound Device 2
Mode=relative time
Riaa=Yes Preamp Left=32 db Preamp Right=28 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl 3 not connected
Vinyl 4 not connected

maybe you could help me out ?

grtz

Hey,

the config looks like normal but I have a question to your configuration of the system.

How do you connected the turntables to the soundcard and the soundcard to the mixer? Please give details about it for example: output of the tt to the input 1/2 of the soundcard. Soundcard output 1/2 to the LINE IN of the Mixer.

regards
Christian