MIXVIBES Dj Community old forum

Hello ,
i have downloaded the latest drivers for the U-MIXX44 but every time i set it up with mix-vibes DVS it tells me that i have no output connected ???
please help .

Hey,

Have you in DVS selected your U-Mix as asio? and can you please post a config report? That could help to see what is going wrong.

regards
Christian

Config 2011/03/14 11:54

OS= build=7600 processor=PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 15 Stepping 13, GenuineIntel
MixVibes DVS version=7.400 DLL langage=US version=7.400

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=No
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=1 Nb Mixer=0
Managment Type ASIO
Device=MixvibesAsioUMix44 AsioVersion=0 DriverVersion=2
Latency=47 Driver sampling=44100 Nb Input=4 Nb Output=2
Managment Type ASIO
1-Not Connected 1 2-Not Connected 2

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:U-MIX44 Sound Device 1-U-MIX44 Sound Device 2
Mode=absolute
Riaa=No Preamp Left=20 db Preamp Right=20 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=Yes
Decalage=0 ms Time limit=720000 ms
Silence seuil=-100.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.167 Speed Average(1s)=0.097 Speed Average(3s)=0.102


Vinyl2 connected=vinyl version 2
Audio=ASIO source=2:U-MIX44 Sound Device 3-U-MIX44 Sound Device 4
Mode=absolute
Riaa=No Preamp Left=26 db Preamp Right=24 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=Yes
Decalage=0 ms Time limit=720000 ms
Silence seuil=-100.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.302 Speed Average(1s)=0.220 Speed Average(3s)=0.182


Vinyl 3 not connected
Vinyl 4 not connected

Hey,

the report looks normal. Is that the DVS version from the CD or from the forum the RC version?

And is that correct that every startup of the software the configuration is lost? everything? And second question: had you installed first the old driver and then the new or directly the newest from the forum?

regards
Christian

If you're using a x64 OS, you need to use the asio4all drivers.

I have the same problem - sometimes in install wizard program see outputs and sometimes it says - not connected

Please stick to your thread jamal:

viewtopic.php?f=268&t=17981&p=138154#p138154