Problem With DVS 7 Ultimate!

[Support@MixVibes]

Always using the same usb port ?
I remember of similar issue with some computers that doesn't switch off the usb when not powered giving issue on new launch.
That mean you need to unplug/replug the soundcard to switch it off/on.

[jamall]

Ok - I've managed to repair all of the issues but now i have another problem....
1 and 2 channels (turntables) are playing on channel 1 on mixer.
Channel 2 is "empty".

[Blackbrook]

Channel 2 is "empty".

A better explanation would help. I can not imagine what exactly might be wrong :-(

[jamall]

Hmmm - i have connected turntable 1 as channel 1 - turntable 2 as channel 2. Now when crossfader is on channel 1 on the mixer i hear 2 turntables at the same time and when Cross is on channel 2 i hear silence
Cheers

[christiankoopmann]

Hey,

which skin do you use? At the carbon V2 skin you can see at both players at the volume section of the deck (gain, treb, mid, bass) an big "01". The second player should stand at "02" to get output volume to the second output.

regards
Christian

[jamall]

Both has number 1 - how can i change it ?

[christiankoopmann]

very simple click in that field where the number stands and it will change it to the next value. click again and you get the next or the first (depends on the number of configured outputs)

regards
Christian

[jamall]

Ok I will try too do that but now i have another problem...
I start thinkin' that mixvibes is piece of..... not so well workin' equipment. Now Program does not see outputs... Again...
----------
Ok i made few resets of computer and sudenly it is workin (i see outputs in program) but when I try to play right turntable (2 channel) number "2" immediately changes on number 1 and i can't rechange it...

[Blackbrook]

It seems as if your audio interface is not installed correctly, please post a config report and paste it here. Thanks!

[jamall]

Config 2011/10/23 20:51

OS= Service Pack 1 build=7601 processor=PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 30 Stepping 5, GenuineIntel
MixVibes DVS version=7.304 DLL langage=US version=7.300

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=Yes
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=Yes Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=93 max=200
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=1 Nb Mixer=0
Managment Type ASIO
Device=MixvibesAsioUMix44 AsioVersion=0 DriverVersion=2
Latency=6 Driver sampling=44100 Nb Input=2 Nb Output=2
Managment Type ASIO
1- 2-

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:U-MIX44 Sound Device 1-U-MIX44 Sound Device 2
Mode=absolute
Riaa=No Preamp Left=27 db Preamp Right=24 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=Yes
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl2 connected=vinyl version 2
Audio=ASIO source=2:U-MIX44 Sound Device 3-U-MIX44 Sound Device 4
Mode=absolute
Riaa=No Preamp Left=25 db Preamp Right=23 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=Yes
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl 3 not connected
Vinyl 4 not connected