Producer crashed

[phillip]

when i open the software first... then plug in the usb for my u46mk2, Producer crashes. happens everytime. please see screenshot below.

http://i130.photobucket.com/albums/p260 ... _crash.jpg

also, i'm running on 3ms latency and it's still slow when im doing fast juggling/looping. i think the best way to describe it is it sounds as if i'm using belt drive turntables.. where theres a slow start up. i also get cracks, and the sound breaks up at very slow movements.

Config Report:

Config 2008/09/06 13:09

OS=Microsoft Windows XP Service Pack 2 build=2600 processor=PROCESSOR_IDENTIFIER=x86 Family 6 Model 10 Stepping 0, AuthenticAMD
MixVibes Producer version=7.100 DLL langage=US version=7.100

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=rapid
Low gui priority=Yes Equalization bypass=Yes
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=Yes Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=No
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=3 Nb Mixer=0
Managment Type ASIO
Device=ASIO 2.0 - ESI U46DJ AsioVersion=0 DriverVersion=2
Latency=6 Driver sampling=44100 Nb Input=4 Nb Output=6
Managment Type ASIO
1-L:U46DJ 1/2 2-R:U46DJ 1/2
3-L:U46DJ 3/4 4-R:U46DJ 3/4
5-L:U46DJ 5/6 6-R:U46DJ 5/6

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:L:U46DJ 1/2-R:U46DJ 1/2
Mode=absolute
Riaa=Yes Preamp Left=1 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl2 connected=vinyl version 2
Audio=ASIO source=2:L:U46DJ 3/4-R:U46DJ 3/4
Mode=absolute
Riaa=Yes Preamp Left=4 db Preamp Right=4 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=Yes
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl 3 not connected
Vinyl 4 not connected

[sonk]

Hi,

as already said in my other post

Try to shut down your AV Software and all other processes wich are not neccersary for Windows.

BR

[phillip]

that may reduce clicks when i'm using it but that doesn't change anything about it crashing when i plug the usb in

[bigbadselecta]

Did you make sure that your BIOS and your chipset-drivers are up2date?

So if you start MixVibes AFTER plugging in your soundcard things are working fine?

[phillip]

So if you start MixVibes AFTER plugging in your soundcard things are working fine?

yes that is correct. also, when i look under control panal >add remove programs, is both mixvibes pro6 and mixvibes Producer supposed to be installed??

[polocorp]

which OS and driver version Phil ?

[N-deep]

also, when i look under control panal >add remove programs, is both mixvibes pro6 and mixvibes Producer supposed to be installed??

yes both should be installed as Producer is a PRO 6 update.