Latency problem

   Report the issues you noticed while using MixVibes.
Forum rules
* Register your software (User Control Panel > Profile > Serial Number)
* Go to the download center and install the latest versions of software and drivers
* Use the search tool to look into topics
* Check the FAQs to be sure your problem hasn't been solved already
* Write in concise and precise ENGLISH Thank you.

Latency problem

Postby Groove Master Cee on 05 Jun 2014, 13:48

Hello there!I use mixvibes DVS and at times the sound appears to have more delay than my move on the vinyl.It gets solved if i unistall and reinstall the program but since i'm bored to do that all the time i need a more convenient solution.Any ideas?
Groove Master Cee
 
Posts: 24
Joined: 22 May 2013, 20:54


Re: Latency problem

Postby RoJeC on 05 Jun 2014, 13:54

Install and uninstall likely is not a solution.
Do you use an ASIO driver for the soundcard.
Try Quant and Snap disabled. You can turn on later if this is the cause. Then use lower values if you want to use it.

Some other setup and config might help us to...
Ronald

Image

downloads + more forums = Register license(ucp.php?i=169)
Apple store new user? first read viewtopic.php?f=259&t=34199
Manual? In Cross open menu, select Help (available 24/7).
Audio dropouts? Increase audio 'buffer size' value.
FAQ iOS / Android / PC / MAC http://www.mixvibes.com/help/
Soundcard not available/working? Try the 32bit version of Cross (is also installed).
RoJeC
 
Posts: 4679
Joined: 20 May 2011, 07:55
Location: Bussum, Netherlands


Re: Latency problem

Postby Groove Master Cee on 26 Jun 2014, 20:20

Config 2014/06/26 22:18

OS= Service Pack 1 build=7601 processor=PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 58 Stepping 9, GenuineIntel
MixVibes DVS version=7.010 DLL langage=US version=7.000

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=No Equalization bypass=No
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Style=XP2005
TAG V1=Yes TAG V2=No

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=No
Display Pitch=No Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=MIXVIBES U46MK2 ASIO AsioVersion=0 DriverVersion=2
Latency=12 Driver sampling=44100 Nb Input=4 Nb Output=6
Managment Type ASIO
1-MIXVIBES U46 1/2:L 2-MIXVIBES U46 1/2:R
3-MIXVIBES U46 3/4:L 4-MIXVIBES U46 3/4:R

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:MIXVIBES U46 1/2:L-MIXVIBES U46 1/2:R
Mode=Absolute
Riaa=Yes Preamp Left=0 db Preamp Right=-1 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.420 Volume max right=0.436 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl2 connected=vinyl version 2
Audio=ASIO source=2:MIXVIBES U46 3/4:L-MIXVIBES U46 3/4:R
Mode=Absolute
Riaa=Yes Preamp Left=1 db Preamp Right=1 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=Yes
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.368 Volume max right=0.385 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000
Groove Master Cee
 
Posts: 24
Joined: 22 May 2013, 20:54


Re: Latency problem

Postby RoJeC on 26 Jun 2014, 20:37

Sorry. I can't be of much help. Assumed you ment the new Cross DVS. You might consider upgrading to have a product for the current OS and hardware.
Meanwhile someone with mv DVS experience will have to help you further.
Ronald

Image

downloads + more forums = Register license(ucp.php?i=169)
Apple store new user? first read viewtopic.php?f=259&t=34199
Manual? In Cross open menu, select Help (available 24/7).
Audio dropouts? Increase audio 'buffer size' value.
FAQ iOS / Android / PC / MAC http://www.mixvibes.com/help/
Soundcard not available/working? Try the 32bit version of Cross (is also installed).
RoJeC
 
Posts: 4679
Joined: 20 May 2011, 07:55
Location: Bussum, Netherlands


Re: Latency problem

Postby Groove Master Cee on 27 Jun 2014, 10:18

Unfortunately,no it's not Cross.Whatever,thanx for your time bro.
Groove Master Cee
 
Posts: 24
Joined: 22 May 2013, 20:54



Return to MixVibes 7 support




Who is online

Users browsing this forum: No registered users and 2 guests

 
 
   
 
© 2014 Mixvibes