NO PUEDO CONFIGURAR LOS TIMECODES

  

NO PUEDO CONFIGURAR LOS TIMECODES

Postby yharedj on 06 Dec 2012, 03:17

Hola amigos de Mixvibes DVS, ya se que DVS murió pero estoy intentando colocar mi setup completo en el soft.
el programa me corre bello con dos cd player o tornamesas en su defecto con la interface, pero tengo dos interfaces, y las conecto y todo lo reconoce bien, pero a la hora de conectar los cd players y platos, esta todo muerto, como que no mandara señal, alguien lo ha intentado ? ....
aquí dejo mi configuración Report

Config 2012/12/05 20:43

OS= build=9200 processor=PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 42 Stepping 7, GenuineIntel
MixVibes DVS version=7.400 DLL langage=US version=7.400

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes Channel3= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=No
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=3 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=No Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=3 Nb Mixer=0
Managment Type ASIO
Device=MIXVIBES U46MK2 ASIO AsioVersion=0 DriverVersion=2
Latency=6 Driver sampling=44100 Nb Input=8 Nb Output=12
Managment Type ASIO
1-MIXVIBES U46 1/2:L 2-MIXVIBES U46 1/2:R
3-MIXVIBES U46 3/4:L 4-MIXVIBES U46 3/4:R
5-MIXVIBES U46 5/6:L 6-MIXVIBES U46 5/6:R

Vinyl Configuration
--------------------
Vinyl1 connected=CD
Audio=ASIO source=0:MIXVIBES U46 1/2:L-MIXVIBES U46 1/2:R
Mode=absolute
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.000 Volume max left=0.000 Volume max right=7912021039705755800000000000.000 Volume optimum=0.000
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl2 connected=CD
Audio=ASIO source=2:MIXVIBES U46 3/4:L-MIXVIBES U46 3/4:R
Mode=absolute
Riaa=No Preamp Left=-2 db Preamp Right=-2 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=Yes
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.000 Volume max left=0.000 Volume max right=7912021039705755800000000000.000 Volume optimum=0.000
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl3 connected=vinyl version 2
Audio=ASIO source=0:MIXVIBES U46 1/2:L-MIXVIBES U46 1/2:R
Mode=absolute
Riaa=Yes Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl 4 not connected
:twisted:
Laptop HP G7
Intel Core i3 M330 2.33ghz
8Gb DDR3 1333Mhz
Intel HD graphics
Windows 8 Professional
2 U46MKII
2 Technics MKII SL-1200MK
1 CDJ 800
1 CDJ 800MKII
User avatar
yharedj
 
Posts: 47
Joined: 06 Jun 2008, 22:28
Location: Caracas, Venezuela


Re: NO PUEDO CONFIGURAR LOS TIMECODES

Postby BBoyElmo1 on 07 Dec 2012, 16:58

TE DEJO MI VIDEO, YA CASI SE SUBEN LAS OTRAS DOS PARTES. ESPERO TE PUEDA SERVIR DE ALGO.
https://www.youtube.com/watch?v=NR4efVAIb0A
BBoyElmo1
 
Posts: 10
Joined: 27 Dec 2011, 04:25
Location: México


Re: NO PUEDO CONFIGURAR LOS TIMECODES

Postby Henry Jay on 02 Feb 2013, 01:38

ola estou a 4 dias tentando entrar em conta com suporte... na pagina do site não consegui sera que você poderia me ajudar ....
Não consigo usar meu Cross DJ (timecode vinil) .... eu ja baixei a versão atualizada do crossdj 2.3 mais não estou conseguindo fazer os timecode vinil funcionar
Consegui configurar a placa DJ Trim (inteface de audio) consigo até ouvir o sinal de time code entrando no Software ... mais ele não faz a musica rodar oque devo fazer? abraços
hello am to 4 days trying to get in is supported ... page on the site you will be unable to help me ....
I can not use my Cross DJ (timecode vinyl) .... I already downloaded the updated version 2.3 crossdj more'm not able to do the work timecode vinyl
I managed to configure the card DJ Trim (audio inteface) until you hear the signal time code into the Software ... plus he does not run the music what do I do? hugs
Henry Jay
 
Posts: 92
Joined: 31 Jan 2013, 04:27
Location: São Paulo - Brasil


Re: NO PUEDO CONFIGURAR LOS TIMECODES

Postby Support@MixVibes on 20 Feb 2013, 12:19

CrossDJ no puede usar los vinyls, este es el trabajo de Cross.
CrossDJ doesn't handle timecode. It is Cross that does.
User avatar
Support@MixVibes
 


Re: NO PUEDO CONFIGURAR LOS TIMECODES

Postby Henry Jay on 05 Apr 2013, 00:37

Support@MixVibes wrote:CrossDJ no puede usar los vinyls, este es el trabajo de Cross.
CrossDJ doesn't handle timecode. It is Cross that does.


Verdade depois eu comprei o Cross... e fiquei muito satisfeito parabéns pelo Trabalho de vcs da Mix Vibes .... eu sou DJ e Produtor de vídeo, em breve vou produzir um vídeo set fazendo mixagens com vídeo... estou criando um curso de VJay utilizando o Cross com vídeo plugin aqui na escola de DJ que eu Trabalho ... assim que eu terminar o vídeo mando pra vocês, abraços Henry Jay
Henry Jay
 
Posts: 92
Joined: 31 Jan 2013, 04:27
Location: São Paulo - Brasil



Return to Español




Who is online

Users browsing this forum: No registered users and 2 guests

Board index

 
 
   
 
© 2014 Mixvibes