Page 1 of 1

Bekomme meine Plattenspieler nicht kalibriert

PostPosted: 23 Sep 2008, 04:00
by djtrnx
Hallo Leute habe mir das DVS PACK mk2 zugelegt und auch alle neusten Updates installiert aber immer wenn ich meine Plattenspieler mit den timecode vinyls kalibrieren will kommt bei jedem plattenspieler diese meldung !

Player wurde nicht Richtig kalibriert
Mixvibes konnte den Timecode nicht erkennen. Überprüfe bitte Vinyl und Nadel

aber ich kann trozdem scratchen usw nur ich bekomm sie einfach nicht aktiviert habe video etc... alles angeguckt... nix zu machen deshalb die frage könnt ihr mir helfen ? siehe unten mein Installations Report ! Lg Trnx


Config Report:
Config 2008/09/23 03:49

OS=Microsoft Windows XP Service Pack 2 build=2600 processor=PROCESSOR_IDENTIFIER=x86 Family 15 Model 75 Stepping 2, AuthenticAMD
MixVibes DVS version=7.100 DLL langage=DE version=7.100

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=No
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=3
TAG V1=Yes TAG V2=No

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=ASIO 2.0 - ESI U46 AsioVersion=0 DriverVersion=2
Latency=6 Driver sampling=44100 Nb Input=4 Nb Output=6
Managment Type ASIO
1-L:U46DJ 1/2 2-R:U46DJ 1/2
3-L:U46DJ 3/4 4-R:U46DJ 3/4

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:L:U46DJ 1/2-R:U46DJ 1/2
Mode=all relative
Riaa=Yes Preamp Left=2 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=3540 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.336 Volume max right=0.371 Volume optimum=0.370
Speed Average(100ms)=0.979 Speed Average(1s)=0.978 Speed Average(3s)=0.979


Vinyl2 connected=vinyl version 2
Audio=ASIO source=2:L:U46DJ 3/4-R:U46DJ 3/4
Mode=all relative
Riaa=Yes Preamp Left=3 db Preamp Right=2 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=Yes
Decalage=13319 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.386 Volume max right=0.342 Volume optimum=0.370
Speed Average(100ms)=0.993 Speed Average(1s)=0.991 Speed Average(3s)=0.991

Re: Bekomme meine Plattenspieler nicht kalibriert

PostPosted: 23 Sep 2008, 18:19
by MixVinz
Hallo

Dein Timecode liegt bei 0%.
Checke mal :
- deine Kabel
- deine Tonabnehmer (kaputt, staub?)
- Deine Erdung deiner TT (dass es gut an den Mixer oder Soundkarte angeschlossen ist)
- Staub auf dem Vinyl?

Aus deinem Konfig Report:
- Vinyl modus ist 'all relative', mach mal wieder Absolut
- Du hast hier offset gesetzt. (unter einstellungen>optionen>Vinyl, setze es wieder zu 0

Re: Bekomme meine Plattenspieler nicht kalibriert

PostPosted: 23 Sep 2008, 19:32
by djtrnx
Habe es beide wieder auf Absolute gestellt und siehe da es funzt 100% !!!

Danke !!!!

Re: Bekomme meine Plattenspieler nicht kalibriert

PostPosted: 24 Sep 2008, 10:28
by MixVinz
Bitte schön!

Absolut ist immer bevorzugt bei der Kalibrierung (ist präziser = wie normale vinyl Abspielen).

Alle weitere Modi kannst du dann natürlich benutzen.

Re: Bekomme meine Plattenspieler nicht kalibriert

PostPosted: 25 Sep 2008, 17:49
by djtrnx
jah das löppt nun genial :)

Re: Bekomme meine Plattenspieler nicht kalibriert

PostPosted: 26 Sep 2008, 10:10
by MixVinz
Das freut mich!!
Viel Spass weiterhin mit MixVibes!!