Intelligent Loop doesnt work in mixvibes 7.4

[Fant0m]

Hi guys,

i recently updated from mixvibes 7.3 to 7.4. The problem is that even though i activated intelligent loops it doesnt work at all. In 7.3 when i did press the F1 button the loop started when i pressed F2 it endet exactly 4 or 8 or what ever beats later. When i did press F1 again the loop stopped and the song went on. Now i press F1 and the loop starts F2 stops it and F3 returns the song. Also the marked beats are white now which is different from the loop i was used to from 7.3 aswell.
The problem is that the beats now are not automatically completet to 8 beats. They are sometimes off slightly and as result the beat doesn't match anymore.
I attach my config report and hope you can help me.

Best regards



Config 2010/10/27 15:26

OS=Microsoft Windows XP Service Pack 3 build=2600 processor=PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 13, GenuineIntel
MixVibes Producer version=7.400 DLL langage=US version=7.400

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=14 Load time=normal
Low gui priority=Yes Equalization bypass=Yes
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=3
TAG V1=Yes TAG V2=No

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=50 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=Maya44 USBAudio ASIO driver AsioVersion=0 DriverVersion=34081536
Latency=6 Driver sampling=44100 Nb Input=4 Nb Output=4
Managment Type ASIO
1-OUT 0 - Maya44 2-OUT 1 - Maya44
3-OUT 2 - Maya44 4-OUT 3 - Maya44

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:IN 0 - Maya44-IN 1 - Maya44
Mode=all relative
Riaa=Yes Preamp Left=27 db Preamp Right=27 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl2 connected=vinyl version 2
Audio=ASIO source=2:IN 2 - Maya44-IN 3 - Maya44
Mode=all relative
Riaa=Yes Preamp Left=27 db Preamp Right=27 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl 3 not connected
Vinyl 4 not connected

[Support@MixVibes]

Here is the behavior of 7.4 :
F1 : manual loop in
F2 : manual loop out
F3 : manual loop exit/reloop
F4 : autoloop on/off

mv_keyb.jpg

[Fant0m]

Thank you for your reply!


I got a acai lpd 8 pad which i use for loops. I now understand how automatic loop behaves but it doesnt work with my pad. If i click send 16 beats or 8 beats mixvibes loops the beats as it should. If i click again it returns playing the song. If i bind the send key on my pad it also starts a loop but if i touch the button again it doesnt return into playback... I dont want to switch back to 7.3 because i really like the new bpm and the fact that you cant have songs twice in playlists.

Thanks in advance

[Support@MixVibes]

Please post the code of the pad to see what's wrong with it.