MIXVIBES Dj Community old forum

Closed forum. You can only use it as a source of information about MixVibes software
http://forum.mixvibes.com/

config not saving!

http://forum.mixvibes.com/viewtopic.php?f=259&t=9806

Page 1 of 1

config not saving!

PostPosted: 18 Jun 2008, 05:57
by BeatChemist
When i open mixvibes i set up everything though the install wizard like the first time, and everything works great. if i then close mix vibes and restart it with or without restarting my computer, all the configs i set are gone. so everytime i open mixvibes to DJ i have to go though the whole install wizard for it work right! also if i dont use the install wizard and go to options > vinyl. the ASIO doesnt show up in audio and there is nothing in the source drop down menu, untill i use install wizard again. why wont it save my setting? should i get it all set up working right and then just click "save" in config? im lost... help!

Re: config not saving!

PostPosted: 18 Jun 2008, 06:49
by UncleVibes
Are you on Vista? Post your config report.

Re: config not saving!

PostPosted: 18 Jun 2008, 22:26
by BeatChemist
this is the config after i use install wizard and eveything works fine.
Config Report:
Config 2008/06/18 16:12

OS=Microsoft Windows XP Service Pack 2 build=2600 processor=PROCESSOR_IDENTIFIER=x86 Family 6 Model 23 Stepping 6, GenuineIntel
MixVibes DVS version=6.411 DLL langage=US version=6.290

System Setting
--------------------
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=Yes
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=0
Windows Moveable=No
TAG V1=Yes TAG V2=No

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=120 max=185
Loop in bar boundaries=No Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=MIXVIBES U46MK2 ASIO AsioVersion=0 DriverVersion=2
Latency=12 Driver sampling=44100 Nb Input=4 Nb Output=6
Managment Type ASIO
1-L:U46DJ 1/2 2-R:U46DJ 1/2
3-L:U46DJ 3/4 4-R:U46DJ 3/4

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:L:U46DJ 1/2-R:U46DJ 1/2
Mode=Absolute
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0
45T=Yes InverseLR=No PhaseInv=No
Offset=0 ms
Noise Level=-40.000 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl2 connected=vinyl version 2
Audio=ASIO source=2:L:U46DJ 3/4-R:U46DJ 3/4
Mode=Absolute
Riaa=No Preamp Left=4 db Preamp Right=2 db Noise Filter=0
45T=Yes InverseLR=No PhaseInv=Yes
Offset=0 ms
Noise Level=-40.000 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


this config is after i use install wizard and then close mixvibes & restart it with or without restarting my computer
Config Report:
Config 2008/06/18 16:02

OS=Microsoft Windows XP Service Pack 2 build=2600 processor=PROCESSOR_IDENTIFIER=x86 Family 6 Model 23 Stepping 6, GenuineIntel
MixVibes DVS version=6.411 DLL langage=US version=6.290

System Setting
--------------------
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=Yes
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=0
Windows Moveable=No
TAG V1=Yes TAG V2=No

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=100 max=190
Loop in bar boundaries=No Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type Multi Channel
Device=U46MK2 Ch123456 Latency=100

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=U46MK2 Ch123456 source=Digital Mic
Mode=Absolute
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0
45T=Yes InverseLR=No PhaseInv=No
Offset=0 ms
Noise Level=-40.000 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl2 connected=vinyl version 2
Audio=U46MK2 Ch12 source=
Mode=Absolute
Riaa=No Preamp Left=4 db Preamp Right=3 db Noise Filter=0
45T=Yes InverseLR=No PhaseInv=Yes
Offset=0 ms
Noise Level=-40.000 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


hope this helps!
also im using windows xp home

Re: config not saving!

PostPosted: 23 Jun 2008, 17:17
by djegun
I suggest you to update your MV. Download the MixVibes 7 RC2 there: release-candidate.html
- Download it
- Unzipp it
- Launch the install.exe
- Choose a different repertory file (something like C:\Program Files\MixVibesDVS7) if you want to keep the 6.411 version too.
All times are UTC + 1 hour [ DST ]
Page 1 of 1
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/