Page 1 of 5

still got some cracks and distortion[update]

PostPosted: 28 Jun 2007, 18:01
by Dj Pac-One
as i wrote above
i'm really pissed of that
and when i move the vinyl slow it not sounds like vinyl
i've been trying to set it up corectly since two week and no results it starts to drive me crazy ahhhhhh :evil:
anyone can help me?

could you please send a config report of your setup

PostPosted: 28 Jun 2007, 22:36
by polocorp
Hi man,

I'd like to help.
What interface are you using?
could you please send a config report of your setup (in the "file" menu) ?

cheers
Paul

Mixvibes Ressources->Updates->Updates DVS->6.38 update

PostPosted: 29 Jun 2007, 09:18
by UncleVibes
Go to the forums Mixvibes Ressources -> Updates DVS -> 6.38 update
Do the full setup & click on install U46MK2 drivers then do the sound card setup assistant in Mixvibes -> Assistant

I hadn't seen the signature

PostPosted: 29 Jun 2007, 18:33
by polocorp
thanks uncle, I hadn't seen the signature ;)

i've already installed that version u send me and it works

PostPosted: 30 Jun 2007, 13:35
by Dj Pac-One
hi
i've already installed that version u send me and it works properly now without any problems .thank a lot for help i'm really appreciate for that .yeah i started my day with a good :-D: mood

this is my config report

PostPosted: 30 Jun 2007, 13:38
by Dj Pac-One
and this is my config report

Config Report:
Config 2007/06/30 13:37

OS=Microsoft Windows XP Service Pack 2 build=2600 processor=PROCESSOR_IDENTIFIER=x86 Family 6 Model 13 Stepping 8, GenuineIntel
MixVibes DVS version=6.380 DLL langage=US version=6.290

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Priority program=normal Low gui priority=Yes Equalization bypass=Yes
Microsoft codec=No MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=0
Windows Caption=No Style=XP2005
TAG V1=Yes TAG V2=No

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Lock Out=Yes Volume=Yes Equalization=Yes Loop=No Effects=No
Loop in bar boundaries=No Security=No History=Yes
Compressor=No Limiter=No
Noise=Yes Vol=0 Crakle=Yes Vol=0 Back Mute=No Scratch Sensibilty=0

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=MIXVIBES U46MK2 ASIO AsioVersion=0 DriverVersion=2
Latency=3 Driver sampling=44100 Nb Input=4 Nb Output=6
Managment Type ASIO
1-USB Audio Device 1 2-USB Audio Device 2
3-USB Audio Device 3 4-USB Audio Device 4

Vinyl Configuration
--------------------
Style mix=scratch

Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:USB Audio Device 1-USB Audio Device 2
Mode=Absolute
Riaa=Yes Preamp Left=6 db Preamp Right=5 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.342 Volume max right=0.345 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000
Vinyl2 connected=vinyl version 2
Audio=ASIO source=2:USB Audio Device 3-USB Audio Device 4
Mode=Absolute
Riaa=Yes Preamp Left=8 db Preamp Right=6 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.337 Volume max right=0.329 Volume optimum=0.370
Speed Average(100ms)=0.031 Speed Average(1s)=0.000 Speed Average(3s)=0.000

Do you have at least 95% code received?

PostPosted: 30 Jun 2007, 14:27
by UncleVibes
You still doesn't have 95% of time code received? Do you?

Re: still got some cracks and distortion

PostPosted: 01 Jul 2007, 14:57
by Dj Pac-One
no i don't have
but cracks and distortion gone r and it sounds better
sometimes i hear waveing sound dont know why

Re: Mixvibes Ressources->Updates->Updates DVS->6.38 update

PostPosted: 03 Jul 2007, 10:02
by Bang Ali
Uncle V I B E S wrote:
Go to the forums Mixvibes Ressources -> Updates DVS -> 6.38 update
Do the full setup & click on install U46MK2 drivers then do the sound card setup assistant in Mixvibes -> Assistant


I only find u46mk2 driver links it the resources forum but no update to mv DVS 6.38. Would u recommend to update anyway when i already have version 6.33. Because i have a similar problem, i have some clicks when doing fast things like 2time chirpflares. when i scratch both records simoultanly big pop sounds appear (proper juggling).

My latency is set to 256 samples and i installed the drivers from the cd. btw i have no internet at home so in case i need to update mv please send me a link where i can download it from a PC without installed mv.

Should i install 3dex and uninstall DVS???

PostPosted: 03 Jul 2007, 11:47
by Bang Ali
oopsy, version 6.38 is mv 3dex not DVS. Should i install 3dex and uninstall DVS??? or just update like copy and paste the 3dex files in the DVS folder????



No of course not do not copy & paste. Unzip DVS update in a folder & then click on install, do the full setup. At the end of the update click on install u46mk2 then just follow the instructions to the end. At your first launch of DVS do the config assistant & follow the steps. That's should be all.