Input issues

[deejaycarlos]

Hello

So I have a new problem that hopefully someone can shed some light on ..

I only seem to have one input working


In preferences , audio , the top drop down tab where I select drivers

There is 3x drivers

U46mk2 ch12
Uk46mk2 ch 56
U46mk2 ch34


Plus various others

What one should I be using ?


Basically want 2 turntables to work on separate channels

Someone give me an idiots guide to what options and tabs should be on or off please

Thanks in advance
Carl

[Blackbrook]

Hey Carl,

what you see there should not be the audio interface but its channels. Assign the channels 1/2 to the input 1, channels 3/4 to input 2 and you should be ready to go.

In case it does not work please post a screenshot of your audio config in Cross

Cheers

[deejaycarlos]

hi

right I now have both tuntables connected , but they will not manipulate the software , I can play songs using the play button on the program through both channels on my mixer .

everytime I play the vinyl its just a tone , and is not start stopping the song

thanks for your help

[daniel clark]

check the manual for instructions on setting up t c ,,also what t c vinals are you useing
also look at the instruction for muting the inputs of the t c signal ,,shouldnt here

[jaymarkus]

first:
Go to Preferences /Audio Tab / Use Asio 2.0 for the U46MK2
Audio Tab / Routing Modus ( Exeternal Mixer Cue)

Second:
Go to the Soundcard preferences from >ESI Audio Panel
Under the 2 Linefaders you see an Button with an M(Mute) Push these buttons.

So you should now use Cross
have Fun