MIXVIBES Dj Community old forum

Hello, I wanted to know how to configure the microphone to Cross DJ, I select in the options the microphone that desire, profit and well, the program itself does not appear if it is working or not. Please help, I use a sound card driver usb with asio4all.

The translation to English likely isn't fully right....

Several types of microphones exist. So the answer may not be easy with the current information.

Some options:
you have a controller/soundcard with Microphone connector > most send the microphone signal direct to the Output. Not to the PC/Mac.

You have a PC microphone and connect it to a PC input. You may have to combine soundcards to be able to use the mic as an input. It may also depend on the amplifier for the mic if sound is OK.

You have a wireless mic with a receiver that has Line Out. This can be connected to any Line input connected to PC/MAC. Be aware that not all PC/Mac allow the mic input to be used as Line input; worst case damaging your soundcard irreversible.

And there are more options...

Solve my problem, it was just selecting the entry into ASIO and perfect, without echoes or delays, accurate and precise. Thanks for the help

Hi all

Lets get the bumf out the way.. I am using Windows 10, a Numark djio2 external sound card and the 64 bit version of Cross DJ 3.3.1.1.

The mic works fine but how do I record?

Any help greatly appreciated,

Thanks,

Daniel Kent; DJ KrUciAL