DVS Ultimate

[Brian Arrington]

:cool: dont worry everyone meets the learning curve ,, while you are on the fourm download the fee version of Cross ,, if you enjoy the DVS set up ,, Cross has that also ,, cant hurt to look

...have to go feed the "mid life crisis monster" right now...lol

[daniel clark]

handel your buisness ,, see you on the fourm ,,

[Brian Arrington]

Ok folks, I am back. I had the Mixvibes Ultimate working and all of a sudden it stopped. I would have posted as soon as it happened but got to frustrated. I can not get Deck one to calibrate. Any suggestions?

[Brian Arrington]

Here is my report:

Config 2014/08/10 07:53

OS= Service Pack 1 build=7601 processor=PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 15 Stepping 11, GenuineIntel
MixVibes DVS version=7.400 DLL langage=US version=7.400

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=Yes
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=MixvibesAsioUMix44 AsioVersion=0 DriverVersion=2
Latency=6 Driver sampling=44100 Nb Input=4 Nb Output=4
Managment Type ASIO
1-U-MIX44 Sound Device 1 2-U-MIX44 Sound Device 2
3-U-MIX44 Sound Device 3 4-U-MIX44 Sound Device 4

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:U-MIX44 Sound Device 1-U-MIX44 Sound Device 2
Mode=absolute
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=41.942 Volume max left=0.156 Volume max right=0.156 Volume optimum=0.370
Speed Average(100ms)=0.099 Speed Average(1s)=0.103 Speed Average(3s)=0.129


Vinyl2 connected=vinyl version 2
Audio=ASIO source=2:U-MIX44 Sound Device 3-U-MIX44 Sound Device 4
Mode=absolute
Riaa=No Preamp Left=4 db Preamp Right=3 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=97.268 Volume max left=0.512 Volume max right=0.512 Volume optimum=0.370
Speed Average(100ms)=1.001 Speed Average(1s)=1.000 Speed Average(3s)=1.000


Vinyl 3 not connected
Vinyl 4 not connected


.......can someone tell me something. This is really driving me nuts!

[RoJeC]

Not familiar with your version. However don't think info on OS is provided yet. It might be you try to run it on non supported os.

[daniel clark]

Ok folks, I am back. I had the Mixvibes Ultimate working and all of a sudden it stopped. I would have posted as soon as it happened but got to frustrated. I can not get Deck one to calibrate. Any suggestions?

sounds like a connection fault ,, what have you tried top remidy this ,, switching tt one deck to the other ,, to elimnate a hardware issue with the side that not calibrating ,, check all connections and stylus connections also

[Brian Arrington]

Ok folks, I am back. I had the Mixvibes Ultimate working and all of a sudden it stopped. I would have posted as soon as it happened but got to frustrated. I can not get Deck one to calibrate. Any suggestions?

sounds like a connection fault ,, what have you tried top remidy this ,, switching tt one deck to the other ,, to elimnate a hardware issue with the side that not calibrating ,, check all connections and stylus connections also

I thought so as well so I have switched everything around to no avail. Now I have it playing but it is not functioning properly. I switched to rapid mode to make it play but now I can not use sync functions of any kind and am unable to cue songs.

[Brian Arrington]

I should have gone with MIDI setup as my first judgement told me....

[djdubc]

its probably ur soundcard, i had the same issue the first time, all i did was trade it back for a new 1 and problem solved