anyone have a launchpad set up for Cross

   Talk about gear, music, shows or anything you'd like.
Forum rules
Click here to join Mixvibes on DISCORD https://discord.gg/gMdQJ2cJqa

Re: anyone have a launchpad set up for Cross

Postby Alexkidd on 10 Jan 2013, 12:56

You should wait for the official update of Cross 2.3. flux mode and such.

abitmessie wrote:I have one somewhere in the middle of building up my new laptop once ive transferd the data ill upload it

might need a little update before i do, more features have since been added to Cross
ill map them and upload in the next week or so
User avatar
Alexkidd
 
Posts: 228
Joined: 14 Jul 2011, 13:33
Location: Greece


Re: anyone have a launchpad set up for Cross

Postby RhythmicNature on 20 May 2013, 21:25

launchpad.mappings.xml
cinq wrote:It controlls sampler, hot cues, play/sync/cue, filters and FX. I'll photoshop a launchpad image to give you more info


Thank you Cinq - just what I needed!

Building off of Cinq's awesome work - I added some output. It works on 2.4. Also I want to draw attention to the fact that the play/cue buttons seem swapped in the photo. I think play is the one on the right.

It's still a work in progress but here are the additions:

1. All HOT-CUES light up in RED when set.
2. All SAMPLES light up in GREEN when running
3. PLAY lights up in AMBER when running
4. CUE blinks AMBER when paused, solid when starting using the CUE button, etc.

Frank.
You do not have the required permissions to view the files attached to this post.
User avatar
RhythmicNature
 
Posts: 21
Joined: 11 May 2013, 04:17


Re: anyone have a launchpad set up for Cross

Postby Alexkidd on 21 May 2013, 21:33

RhythmicNature wrote:
cinq wrote:It controlls sampler, hot cues, play/sync/cue, filters and FX. I'll photoshop a launchpad image to give you more info


Thank you Cinq - just what I needed!

Building off of Cinq's awesome work - I added some output. It works on 2.4. Also I want to draw attention to the fact that the play/cue buttons seem swapped in the photo. I think play is the one on the right.

It's still a work in progress but here are the additions:

1. All HOT-CUES light up in RED when set.
2. All SAMPLES light up in GREEN when running
3. PLAY lights up in AMBER when running
4. CUE blinks AMBER when paused, solid when starting using the CUE button, etc.

Frank.



Wow that's great! I'll download and test it. I should have completed it but my studies haven't left me much time. Thank you very much Frank! :)
User avatar
Alexkidd
 
Posts: 228
Joined: 14 Jul 2011, 13:33
Location: Greece


Re: anyone have a launchpad set up for Cross

Postby RhythmicNature on 23 May 2013, 01:32

launchpad.mappings.v1.2e.xml
cinq wrote:Wow that's great! I'll download and test it. I should have completed it but my studies haven't left me much time. Thank you very much Frank! :)


No Problem. Thank you for the original! If you liked the previous version I think you'll like the most recent edits...

Changelog:
201301?? Cinq creates initial release

20130519 FBomb/RhythmicNature -
1. Output Mappings added:
1. play/pause = amber(hi)/off
2. cue = amber(hi)/off and blink during pause
3. hotcues = red(hi)
4. sample triggers = green

20130521 FBomb/RhythmicNature -
1. Output Mappings added:
1. FX on = green
2. AutoLoop on = green
2. Functionality Added:
1. SHIFT + AutoLoop- = 4 Beat AutoLoop
2. SHIFT + AutoLoop+ = 8 Beat AutoLoop
3. SHIFT + AutoLoop on/off = 16 Beat AutoLoop
3. Replace SetXonY with SetMaster (input & output)
3b. The SetMaster Button shows Green if master.
4. Replace Right Bottom-most button with SyncWithMaster
5. Version Bump to 1.2d

20130522 FBomb/RhythmicNature -
1. Mapped the MIXER (top right) button to Shift trigger - for Gain/EQ mode
1a. Added a green light to Mixer Mode when on
2. Added Gain Up and Gain down for Deck C, A, B, D
3. Added Treble Up and Treble Down for Deck C, A, B, D
4. Added Mid Up and Mid Down for Deck C, A, B, D
5. Added Bass up and Bass down for Deck C, A, B, D
6. Added Filter up and Filter down for Deck C,A,B,D (Mixer Mode version)
7. Added Volume up and Volume down for Deck C, A, B, D
8. Added full Crossfader to whole bottom row
- Left Most button = 0%
- Right most button = 100%
- all buttons between evenly spaced
- Bottom ROUND button ("arm") = 50%
- slide fingers along bottom row for fade
9. Added Match with Master button (SHIFT+SYNC)
10. Verison Bump to 1.2e


The big thing is the addition of the Mixer mode with full control of gain, EQs, volume, etc and a "sliding" crossfader. I also added MatchWithMaster and changed the sync behavior a little to keep it up to date w/ 2.4. A few more output mappings were added and 3 quick "SelectAndTrigger" Autoloops were added for 4,8, and 16 beat loops.

A Note on the Mixer:

The Launchpad is an 8x8 button controller. I used two columns per deck for control. That means columns 1&2 control deck C, 2&4 control Deck A, etc. This aligns perfectly with the knobs in the software. Just like in the sofware the row layout is as such:
gain
hi eq
mid eq
lo eq
filter sweep
volume
<empty for now>
crossfader (across whole row)

To use the mixer mode - hit the green top-right button on the launchpad (conveniently labelled "MIXER") :) No need to hold the button down - it'll light up and stay that way until you press it again.

Then press the main buttons and see what they do. I'll get to a diagram one of these days... :)

Have fun! :)
You do not have the required permissions to view the files attached to this post.
User avatar
RhythmicNature
 
Posts: 21
Joined: 11 May 2013, 04:17


Re: anyone have a launchpad set up for Cross

Postby Alexkidd on 23 May 2013, 09:12

Great work. Tbh i hadn't even thought for a mixer as i use an external one but this shift mod is awesome!! Now launchpad is a stand alone controller.

I have also created another mapping in which the top 2x8 buttons are mapped to 4 particular fx 4 targets for each fx unit but then you need knobs for the amounts and i havent's found a solution on this. but maybe i'll work something out based on your update and i'll upload
User avatar
Alexkidd
 
Posts: 228
Joined: 14 Jul 2011, 13:33
Location: Greece


Re: anyone have a launchpad set up for Cross

Postby RhythmicNature on 01 Jun 2013, 11:28

I used the new mapping at a gig last night. It worked great - but for two things:

1) The lack of labeling made me paranoid I was gonna press the wrong buttons.

2) Having the new mixer settings on another page made not-so-useful.



I have to say tho that I love the easy access to the Locators and Sample triggers. :) :) :)

Thanks again cinq!
User avatar
RhythmicNature
 
Posts: 21
Joined: 11 May 2013, 04:17


Re: anyone have a launchpad set up for Cross

Postby Alexkidd on 04 Jun 2013, 18:24

It is external mixer oriented so i'm thinking of buying a second one to have your mixer mapping on :)

RhythmicNature wrote:I used the new mapping at a gig last night. It worked great - but for two things:

1) The lack of labeling made me paranoid I was gonna press the wrong buttons.

2) Having the new mixer settings on another page made not-so-useful.



I have to say tho that I love the easy access to the Locators and Sample triggers. :) :) :)

Thanks again cinq!
User avatar
Alexkidd
 
Posts: 228
Joined: 14 Jul 2011, 13:33
Location: Greece


TouchOSC Emulator

Postby RhythmicNature on 08 Jun 2013, 08:14

cinq and others who may be interested - check out my new TouchOSC mapping for the Nexus 7. It's still rough but I included a full Launchpad emulator!!!

The basic A<-->B Mixer and Crossfader are also included on the same page as the emulator. :)

I'll eventually get around to porting it to the iPad because my friends have asked for it but I have to get most of the stuff working on the N7 first at least.

http://forum.mixvibes.com/viewtopic.php?f=359&t=28021
User avatar
RhythmicNature
 
Posts: 21
Joined: 11 May 2013, 04:17


Re: anyone have a launchpad set up for Cross

Postby djdeadlife on 16 Aug 2016, 20:22

can i have the mapping too ?
djdeadlife
 
Posts: 8
Joined: 01 Sep 2012, 16:30
Location: San luis , Arizona


Re: anyone have a launchpad set up for Cross

Postby RhythmicNature on 16 Aug 2016, 23:39

djdeadlife wrote:can i have the mapping too ?


The link is about six posts up. :)
User avatar
RhythmicNature
 
Posts: 21
Joined: 11 May 2013, 04:17


PreviousNext

Return to General Chat




Who is online

Users browsing this forum: No registered users and 91 guests

Board index

 
 
   
 
© 2014 Mixvibes