MIXVIBES Dj Community old forum

HI,

I was just wandering what the security,smart loop, tool tips and learning tabs mean when selected in the preferences tab.

Also I keep getting a stutter on both decks for some reason, they stay in time but there is a break in sound?
Also for a while I could just drag and drop a song onto the playing vinyl and it would start the next track (the one i dragged onto it) but now I have to stop the deck and then drag and drop...

can anybody help with my set up please?

thanks for any advice!
cheers

here is my configuration report.....

Config 2012/01/31 20:05

OS=Microsoft Windows XP Service Pack 2 build=2600 processor=PROCESSOR_IDENTIFIER=x86 Family 15 Model 72 Stepping 2, AuthenticAMD
MixVibes DVS version=7.400 DLL langage=US version=7.400

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=Yes
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=Yes History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=MixvibesAsioUMix44 AsioVersion=0 DriverVersion=2
Latency=24 Driver sampling=44100 Nb Input=4 Nb Output=4
Managment Type ASIO
1-U-MIX44 Sound Device 1 2-U-MIX44 Sound Device 2
3-U-MIX44 Sound Device 3 4-U-MIX44 Sound Device 4

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:U-MIX44 Sound Device 1-U-MIX44 Sound Device 2
Mode=all relative
Riaa=No Preamp Left=28 db Preamp Right=25 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=Yes
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.013 Volume max right=0.013 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl2 connected=vinyl version 2
Audio=ASIO source=2:U-MIX44 Sound Device 3-U-MIX44 Sound Device 4
Mode=all relative
Riaa=No Preamp Left=24 db Preamp Right=27 db Noise Filter=0 Hz
45T=No InverseLR=Yes PhaseInv=Yes
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.022 Volume max right=0.022 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl 3 not connected
Vinyl 4 not connected

Hey,

what are the specs of your computer? are the files you use analysed?
You have to stop the player to drag and drop a song! but this should be working with disabling the Save Mode.

Hayden2222 wrote:I was just wandering what the security,smart loop, tool tips and learning tabs mean when selected in the preferences tab.

security Mode : you can't drag and drop a song while running the vinyl or the song is not endet while running vinyl.

Smart Loop: the loop function is setting the start position to the Beat automatical so it is a complete beat (4beat, 8beat and so on)

Tool-Tip: holding the cursor to a function and you will get a little flag at your curser with some information about the function. (hold longer 3seconds)

Lerning tab is for mapping MIDI devices. Enable the function go with the curser to a function and wait until it is silver then press the button on the MIDI device and it should light up in BLUE then go to the next function you want to map. Behind the program is creating the Mapping automaticaly (most functions will work but not all like JOGs!)

regards
Christian