MIXVIBES Dj Community old forum

So I was wondering what else would I need to connect Str8.150's to Traktor or Cross DJ.
I plan to put the input of the turntables through my Mixvibes Control Pro first.

I haven't ever used actual vinyl turntables before so I'm not sure what all the requirements are.
Maybe I should invest in a larger controller instead?
I want to be able to scratch. With the str8.150s or other type of vinyl turn tables, would I be able to use them to scratch any sound clip of my choosing?

Any suggestions / ideas?

Thanks

Hey,

The U-Mix Control Pro has a good sound card and should work with it. The problem is that Cross DJ is MIDI only so if you want to use vinyl control you have to update to Cross. You also need the MixVibes Timecode Vinyls which you can buy at stores where you bought the U-Mix Control Pro.

Regards
Christian

Christian is correct, CrossDJ has no timecode support, it's just MIDI/Keyboard I'm affraid.

You can upgrade to Cross for a special discounted price

http://www.mixvibes.com/content/upgrade-cross

Alright, but Traktor has vinyl support right?

Also, any good places to buy the mixvibes timecode box from?

djmyungki wrote:Alright, but Traktor has vinyl support right? the mixvibes timecode box from?

dont have a clue about tractor
what are you asking about

if you already have U-Mix Control Pro then to use it with time code vinals l and turntables you will need to up grade your software to Cross,which has time code support either for turntable or cdj

Oh so I don't need to buy anything else besides the turn table? Just make sure the software I use has timecode detection and plug the input from the turntables to the mixvibes? :O

you will need the time code vinals for the turntables,,U-Mix Control Pro,and the full version of Cross.there are Cross videos that show use of the U-Mix Control Pro using turntables and time code vinal, that is using the full version of Cross,,Cross DJ is only MIDI controled, check the product tab in the fourm home page to get the spec, and the upgrade price of the software also the avaibility of the tc vinals

For the timecode vinyls, are there specific ones that I have to use to work together with the mixvibes?

djmyungki wrote:Oh so I don't need to buy anything else besides the turn table? Just make sure the software I use has timecode detection and plug the input from the turntables to the mixvibes? :O

Yes, that's correct. The U-Mix Control Pro has a built in ASIO soundcard/Interface so you can play timecodes through it. Just connect your TT's to the units inputs.

djmyungki wrote:For the timecode vinyls, are there specific ones that I have to use to work together with the mixvibes?

Yes. You will need MixVibes own timecodes. No other makes will work

djmyungki wrote:Alright, but Traktor has vinyl support right?

Comparable to Cross: not in all versions!!! Even NOT in the cheap ones!!!