-
-
U-Mix Control Pro firmware 4.2
Only for U-Mix Control Pro (not for U-Mix Control Pro 2).
U-Mix Control Pro firmware 4.2 =======================
Notes --------
Previous version: 3.9
Changes from 3.9 to 4.2 ------------------------------
FIX: An issue that might prevent most recent iCore Apple computers from detecting the built-in soundcard. FIX: Possible MIDI disconnections on some Apple computers.
ENHANCEMENT: The management of the JogWheels note off message is improved.
Instruction for upgrading the firmware
1 Make sure your controller is connected via USB to the computer. 2 Power the device OFF. 3 Press and hold the buttons SHIFT and BROWSE on the controller. 4 Switch the controller on while pressing the buttons SHIFT and BROWSE. 5 Release the buttons SHIFT and BROWSE. The buttons Source A and Source B should light up now. 6 A new drive named "midiUpgDisk" should be found on your system. 7 Drag and drop the firmware file onto the "midiUpgDisk" drive. Make sure that you use the correct firmware file for your controller. The firmware files for U-Mix Control Pro use the following naming pattern: U-MIX_PRO_*V*.bin 8 Once the firmware file is dropped the upgrade process begins. LEDs on the controller inform you about the update progress: • Update Data 30% = KILL BASS A/B are flashing • Update Data 60% = KILL MID A/B are flashing • Update Data 90% = KILL TREB A/B are flashing • Update Success = LOAD A/B are flashing • Update Error = LOAD A/B are off 9 After the firmware is updated, the LEDs will turn off.
Important note There are also a failure message on Mac operating system because the drive created by the U-Mix Control Pro, will automatically removed after the update. Simply, ignore this message and press OK. The firmware was already updated.
For more details, check on our website the article U-Mix Control Pro - FIRMWARE 4.2
Instruction pour mettre à niveau le firmware
1 Assurez-vous que votre contrôleur est connecté via USB à l’ordinateur. 2 Éteignez le contrôleur. 3 Maintenez les touches SHIFT et BROWSE de l’U-Mix Control Pro. 4 Allumez le contrôleur tout en maintenant les touches SHIFT et BROWSE de l’U-Mix Control Pro. 5 Les deux boutons "SOURCE (AB)" doivent s’allumer (vous pouvez relâchez les boutons SHIFT et BROWSE). 6 Un nouveau disque nommé "midiUpgDisk" devrait s’ouvrir dans votre système. 7 Glissez-déposez le fichier du firmware (U-MIX_PRO_ * V *. bin) dans le disque "midiUpgDisk". 8 Les LED de Kill commencent à clignoter lors de la mise à jour : BASS (AB) : mise à jour de données (30%), MID (AB) : mise à jour de données (60%), TREB (AB) : mise à jour de données (90%), LOAD (AB ) : Mise à jour réussie avec succès. Si LOAD (AB) sont éteints cela signifie que la mise à jour a échouée. 9 Après la mis à jour du firmware, les LED s’éteignent.
Note importante Il y a un message d'échec sur le système d'exploitation Mac parce que le disque créé par l'U-Mix Control Pro est automatiquement supprimé après la mise à niveau. Veuillez ignorer ce message et appuyez sur OK. Le firmware a déjà été mis à jour.
Pour plus de détails, lisez l'article U-Mix Control Pro - FIRMWARE 4.2
- 64 KiB
-
-
-
U-Mix Control Pro firmware 4.3
Only for U-Mix Control Pro (not for U-Mix Control Pro 2).
U-Mix Control Pro firmware 4.3 =======================
Notes --------
Previous version: 4.2
Changes from 4.2 to 4.3 ------------------------------
ENHANCEMENT: Now U-Mix Control Pro is compatible with an iPad via the Apple Camera Connection Kit. This allowing to use a U-Mix Control Pro audio interface (with a power supply unit or a powered USB hub) with the CrossDJ for iPad app.
Instruction for upgrading the firmware
1 Make sure your controller is connected via USB to the computer. 2 Power the device OFF. 3 Press and hold the buttons SHIFT and BROWSE on the controller. 4 Switch the controller on while pressing the buttons SHIFT and BROWSE. 5 Release the buttons SHIFT and BROWSE. The buttons Source A and Source B should light up now. 6 A new drive named "midiUpgDisk" should be found on your system. 7 Drag and drop the firmware file onto the "midiUpgDisk" drive. Make sure that you use the correct firmware file for your controller. The firmware files for U-Mix Control Pro use the following naming pattern: U-MIX_PRO_*V*.bin 8 Once the firmware file is dropped the upgrade process begins. LEDs on the controller inform you about the update progress: • Update Data 30% = KILL BASS A/B are flashing • Update Data 60% = KILL MID A/B are flashing • Update Data 90% = KILL TREB A/B are flashing • Update Success = LOAD A/B are flashing • Update Error = LOAD A/B are off 9 After the firmware is updated, the LEDs will turn off.
Important note There are also a failure message on Mac operating system because the drive created by the U-Mix Control Pro, will automatically removed after the update. Simply, ignore this message and press OK. The firmware was already updated.
For more details, check on our website the article U-Mix Control Pro - FIRMWARE UPGRADE
Instruction pour mettre à niveau le firmware
1 Assurez-vous que votre contrôleur est connecté via USB à l’ordinateur. 2 Éteignez le contrôleur. 3 Maintenez les touches SHIFT et BROWSE de l’U-Mix Control Pro. 4 Allumez le contrôleur tout en maintenant les touches SHIFT et BROWSE de l’U-Mix Control Pro. 5 Les deux boutons "SOURCE (AB)" doivent s’allumer (vous pouvez relâchez les boutons SHIFT et BROWSE). 6 Un nouveau disque nommé "midiUpgDisk" devrait s’ouvrir dans votre système. 7 Glissez-déposez le fichier du firmware (U-MIX_PRO_ * V *. bin) dans le disque "midiUpgDisk". 8 Les LED de Kill commencent à clignoter lors de la mise à jour : BASS (AB) : mise à jour de données (30%), MID (AB) : mise à jour de données (60%), TREB (AB) : mise à jour de données (90%), LOAD (AB ) : Mise à jour réussie avec succès. Si LOAD (AB) sont éteints cela signifie que la mise à jour a échouée. 9 Après la mis à jour du firmware, les LED s’éteignent.
Note importante Il y a un message d'échec sur le système d'exploitation Mac parce que le disque créé par l'U-Mix Control Pro est automatiquement supprimé après la mise à niveau. Veuillez ignorer ce message et appuyez sur OK. Le firmware a déjà été mis à jour.
Pour plus de détails, lisez l'article U-Mix Control Pro - FIRMWARE UPGRADE
- 64 KiB
-
|
|
|