-
-
[NATIVE INSTRUMENTS KONTROL X1] MixVibes Cross 2.0.1
Mapped by j-kut
- 177.73 KiB
-
-
-
[NATIVE INSTRUMENTS MASCHINE] MixVibes Cross 2.0.1
Mapped by Mr-G
Find two files in the zip file: "Native Instruments Maschine - by Mr-G.mappings" file needs to be imported into Cross. "Native Instruments Maschine - preset for MixVibes Cross by Mr-G.ncc" file needs to be copied to: My Documents/Native Instruments/Controller Editor.
Find all the controls labeled on the two Maschines controllers displays or also on the Native Instruments controller editor.
Note: It is a complementary mapping to control all mixer and sample elements that can't be tweaked by only using the U-Mix Control Pro. It is not supposed to be used as a standalone controller (although it might be possible).
- 81.5 KiB
-
-
-
[Numark DJ2GO] MixVibes Cross 1.7.1
Mapped by KevMaverick
- 7.72 KiB
-
-
-
[Numark MIXTRACK PRO] MixVibes Cross 1.5
Mapped by Woolsheep
- 11.07 KiB
-
-
-
[Pioneer DDJ-T1] MixVibes Cross 1.6.0
Mapped by Azu
Version 0.3
Needle Search works only if the player is stopped. If the player is playing and you press on the needle bar, then the player stops and returns to the cue point.
- 8.01 KiB
-
-
-
[SYNC DMC.1000] MixVibes Cross 1.5.0
- 376.19 KiB
-
-
-
[SYNC PCM.1] MixVibes Cross 1.5.0
- 459.08 KiB
-
-
-
[Vestax PMC-05ProIV] MixVibes Cross 1.5.0
Mapped by j-kut
Description: -When LEDs are blue the 6 top row buttons are Locators 1-3 for Deck A and Deck B, and the 6 lower Buttons are Locator 1-3 Clear.
-When LEDs are red, the top row Buttons are Loop in, Loop out, Loop on/off for each Deck. The Lower Buttons from left to right are: FX A on/off, FX A Select, "FX A-B Amount decreasing", "FX A-B Amount increasing", FX B Select, FX B on/off
- 8.97 KiB
-
-
-
[Vestax PMC-05ProIV] MixVibes Cross 1.5.0
Mapped by j-kut
Description: *Buttons lit blue: Left to right, upper row buttons: cue1-3 deck a, cue 1-3 deckb left to right, down row: loop-in, -out, -on/off (deck a) loop-in,-out,-on/off (deckb)
*Buttons lit red: Left to right, upper row: A absolute, B absolute, modifier, Erase cues 1-3 Deck A (modifier erase cues deck B) Left to right, down row: FX A on/off, FX a select, decreasing fx-amount, increase fx-amount, FX B select, FX B on/off
*Encoders: Push to load tracks in Deck A/B Turn to scroll playlist Modifier+turn scroll itunes-crates
- 9.1 KiB
-
-
-
[Vestax VCI-100] MixVibes Cross 1.5.0
Mapped by Phadedvision
Here's my current mapping for the Arcade VCI. I made it on the 1.2 firmware so that it can still be used with a regular VCI. I'll port it to 1.3 if enough people use 1.3, and I'll move it over to 1.4 whenever I get around to buying the firmware kit. Enjoy!
Quick rundown of how everything works...
FX ============= Knobs/Buttons above right jog wheel control FX.
K1 ---- K2 ---- K3 ---- K4 B1 ---- B2 ---- B3 ---- B4
K1 & 3 = FX on/off K2 & 4 = FX amount B1 & 3 = FX select -1 B2 & 4 = FX select +1 =============
Mixer ============= K1 K9 K10 K5 K2 --------- K6 K3 --------- K7 K4 --------- K8
K1 - 4 (from top to bottom) = Hi/Mid/Lo/Blank K5 - 8 (from top to bottom) = Hi/Mid/Lo/Blank K9 = Gain A K10 = Gain B
Faders/Crossfader work as expected. =============
Jog Wheels / Pitch faders ============= No changes. =============
Transport controls underneath jog wheels ============= B1 - B2 - B3 - B4
B1 = Cue B2 = Play/Pause B3 = Cue drop B4 = Auto-loop
Holding the "Preview" button (the center button in the navigation area) and pressing B1 - 4 will clear the cue points you've set.
To set cue points, press the topmost button in the left area (next to the four small black buttons) and press B1 - 4. Make sure you press the button again to toggle out of juggle mode. =============
Buttons above jog wheels ============= Deck A: B1 - B2 - B3 - B4 Deck B: B4 - B3 - B1 - B2 (not an exact mirror)
B1 = Loop length -1 B2 = Loop length +1 B3 = Match (I don't think I mapped it) B4 = Sync (Not sure if I mapped that, either)
That's all there really is for now, I plan on adding more soon, but this seems to work pretty well for now. PM me if you need anything.
- 10.72 KiB
-
|
|
|