|
-
-
[AKAI MPD 16]
- 326 B
-
-
-
[AKAI MPD 24]
1-> Create preset named Mixvibes on the MPD24
Select an empty preset named <default xx (by default , first is number 13)
Push Enter
Push 2 times > for see Preset Name
Turn Enter knob for choose the first letter and push > for go to the next letter. Put the name Mixvibes for your preset.
When name is write push PRESET button and > for see SAVE to 13 and push Enter for save.
2->Setup MIDI messages for pads of Bank A for mixvibes preset
Push button Bank A ,
Push button EDIT ,
Push PAD 1 ,
Turn Enter knob for see PROG CHANGE and push Enter for edit config of PAD1.
Set value PROG to 001 ,
Set value BankM to OFF
Set value BankL to OFF
Push Enter for exit
Push PAD2
turn Enter knob for see PROG CHANGE and push Enter for edit config of PAD2.
Set value PROG to 002 ,
Set value BankM to OFF
Set value BankL to OFF
Push Enter for exit
do the same config for all 16 Pads and increase everytime the value PROG.
When all is done push PRESET and > for see SAVE to 13 and push Enter knob for save..
3->Setup MIDI messages for pads of Bank B for mixvibes preset
Push button Bank B ,
Push button EDIT ,
Push PAD1 ,
turn Enter knob for see NOTE and push Enter for edit config of PAD1.
Set value NOTE to 001 MTY OFF
Push Enter for exit
Push PAD2 ,
turn Enter knob for see NOTE and push Enter for edit config of PAD2.
Set value NOTE to 002 MTY OFF
Push Enter for exit
do the same config for all 16 Pads and increase everytime the value NOTE.
When all is done push PRESET and > for see SAVE to 13 and push Enter knob for save..
Now your MPD24 is ready , we can start the setup of mixvibes.
4-> Setup Mixvibes
Download the file include in this post , unzip , and copy file named Akai_MPD24.ini in MIDI folder of your mixvibes directory.
Go to Mixvibes MIDI options ,
Image
Check MIDI box,
Select Device : USB audio device
Select file AKAI_MPD24
check the Show message box
Quit options.
In the menu > Window > check the Info options
Now If all is ok , if you press the PAD1 (in Bank A mode) you must see in the info a line like this :
Image
This line show you MIDI details , if you see it that work :good:
After MSG= you see the MIDI message receive by mixvibes .
After CMD= you see the mixvibes command set for the MIDI message in the file Akai_MPD24.ini
Details of my file :
In Bank A mode , you manage Mixvibes sampler pads in mode PLAYPAUSE.
In Bank B mode , you manage Mixvibes sampler pads in mode PAD .
I let you try for see the difference ;-) .
Tips : Disable velocity by pushing FULL LEVELS button of your MPD24 ,
In Bank B mode it's better (for me...).
FADERS Setup :
FADER1 = PITCH player 1
FADER2 = PITCH player 2
FADER3 = PITCH MV Sampler
FADER4 = VOLUME player 1
FADER5 = VOLUME player 2
FADER6 = VOLUME MV Sampler
Knobs setup :
K7 = Volume Effect 1 player 1
K5 = Volume Effect 2 player 1
K3 = Volume Effect 3 player 1
K1 = Volume Effect 4 player 1
K8 = Volume Effect 1 player 2
K6 = Volume Effect 2 player 2
K4 = Volume Effect 3 player 2
K2 = Volume Effet 4 lecteur 2
And for all last button , they use a MIDI protocol named MMC (MIDI Machine Control) not managed for the moment. (MV is not alone same problem for different sound software like Ableton , Fruity loops ,...)
If you want other function edit the ini file and do it , and share it after ;-)
You can found here a list of all Mixvibes command with sample of keyboard shortcut
(sorry in french but easy to understand or test )
viewtopic.php?f=25&t=7307
Bye
PS :
For expert , here the code of my file :
Code: Select all
//
// MV MIDI FILE FOR AKAI MPD24 BY DJ9
// VERSION 1.0
// PROG CHANGE and NOTE VALUE
// VALUE COMMAND
// no need to specify the MIDI channel
//############################################
//
// BANK A (cc)
//
//############################################
//############### PADS ###############
//
#c0 1 PLAYPAUSE 100 1 //PAD 1
#c0 2 PLAYPAUSE 101 1 //PAD 2
#c0 3 PLAYPAUSE 102 1 //PAD 3
#c0 4 PLAYPAUSE 103 1 //PAD 4
#c0 5 PLAYPAUSE 104 1 //PAD 5
#c0 6 PLAYPAUSE 105 1 //PAD 6
#c0 7 PLAYPAUSE 106 1 //PAD 7
#c0 8 PLAYPAUSE 107 1 //PAD 8
#c0 9 PLAYPAUSE 118 1 //PAD 9
#c0 a PLAYPAUSE 109 1 //PAD 10
#c0 b PLAYPAUSE 110 1 //PAD 11
#c0 c PLAYPAUSE 111 1 //PAD 12
#c0 d PLAYPAUSE 112 1 //PAD 13
#c0 e PLAYPAUSE 113 1 //PAD 14
#c0 f PLAYPAUSE 114 1 //PAD 15
#c0 10 PLAYPAUSE 115 1 //PAD 16
//
//############### FADERS ###############
//
#B0 1 PITCHALL 1 //FADER 1
#B0 2 PITCHALL 2 //FADER 2
#B0 3 PITCHALL 100 //FADER 3
#B0 4 VOLUME 1 //FADER 4
#B0 5 VOLUME 2 //FADER 5
#B0 6 VOLUME -5 //FADER 6
//
//############### POTARS ###############
//
#b0 d EFFECTVOL 1 10 0 //Potar K7
#b0 b EFFECTVOL 1 10 1 //Potar K5
#b0 9 EFFECTVOL 1 10 2 //Potar K3
#b0 7 EFFECTVOL 1 10 3 //Potar K1
#b0 e EFFECTVOL 3 10 0 //Potar K8
#b0 c EFFECTVOL 3 10 1 //Potar K6
#b0 a EFFECTVOL 3 10 2 //Potar K4
#b0 8 EFFECTVOL 3 10 3 //Potar K2
//############################################
//
// BANK B (note)
//
//############################################
#90 1 PAD 100
#90 2 PAD 101
#90 3 PAD 102
#90 4 PAD 103
#90 5 PAD 104
#90 6 PAD 105
#90 7 PAD 106
#90 8 PAD 107
#90 9 PAD 108
#90 a PAD 109
#90 b PAD 110
#90 c PAD 111
#90 d PAD 112
#90 e PAD 113
#90 f PAD 114
#90 10 PAD 115
- 676 B
-
-
-
[ALLEN & HEATH XONE:2D] MixVibes 7
Edition of the MIDI file needed to control Allen & Heath Xone:2D controller with Mixvibes 7.21.
*Channel 16 (default channel)
Map 1
*Explanation of some buttons (from top to bottom):
-'Normal' commands:
Effect 1 on/off // Effect 1 selection
Effect 1 volume (dry/wet)
Effect 1 parameter 1
Volume
Loop in
Loop out
Reloop
Active player switch // Active player Key
Jog: Medias selection
Jog buttons: Hotcue 1 of each player
Load media
-'Shift' commands:
Effect 2 on/off // Effect 2 selection
Effect 2 volume (dry/wet)
Effect 2 parameter 1
Pitch
Beatloop
Beat +
Beat -
Active player switch // Active player Gain
Jog: Medias selection
Jog buttons: Loop memory 1 of each player
Play/Pause/Exit_Beatloop
- 88.11 KiB
-
-
-
[ALLEN & HEATH XONE:4D][2 DECKS] MixVibes 7
Edition of the MIDI file needed to control Allen & Heath Xone:4D controller with Mixvibes 7.21.
*Channel 16 (default channel)
Map 1
*Explanation of some buttons (from top to bottom):
*'Normal' commands:
Rotary encoders:
- Select effect 1
- Effect 1 on/off
- Select autoloop length
- Active autoloop
- Select effect 2
- Effect 2 on/off
Rotary potentiometers:
- Effect 1 volume
- Effect 1 parameter 1
- Effect 1 parameter 2
- Effect 1 parameter 3
- Effect 2 volume
- Effect 2 parameter 1
- Effect 2 parameter 2
- Effect 2 parameter 3
Linear faders:
- Volume
- Pitch
Push buttons:
- Loop in
- Loop out
- Reloop
- Hotloop1
- Hotloop2
- Hotloop3
- Pad1
- Pad2
- Pad3
- Hotcue1
- Hotcue2
- Hotcue3
Rotary encoder:
- Select pitch mode
- Key
Jog Wheel:
- Scratch/Pitchbend
Illuminated push buttons:
- Cue
- Play/Pause
- Set Cue
- Brake
*'Shift' commands:
Push buttons:
- Move loop in point (+/- 10ms)
- Move loop out point (+/- 10ms)
- Move hotcue1 point (+/- 10ms)
- Move hotcue2 point (+/- 10ms)
- Move hotcue3 point (+/- 10ms)
Jog Wheel:
- Select media
- Load media
- 609.38 KiB
-
-
-
[ALLEN & HEATH XONE:4D][4 DECKS] MixVibes 7
Edition of the MIDI file needed to control Allen & Heath Xone:4D controller with Mixvibes 7.21.
*Channel 16 (default channel)
Map 1
*Explanation of some buttons (from top to bottom):
*'Normal' commands:
Rotary encoders:
- Select effect 1
- Effect 1 on/off
- Select autoloop length
- Active autoloop
Rotary potentiometers:
- Effect 1 volume
- Effect 1 parameter 1
- Effect 1 parameter 2
- Effect 1 parameter 3
Linear faders:
- Volume
- Pitch
Push buttons:
- Loop in
- Loop out
- Reloop
- Hotcue1
- Hotcue2
- Hotcue3
Rotary encoder:
- Select pitch mode
- Key
Jog Wheel:
- Scratch/Pitchbend
Illuminated push buttons:
- Cue
- Play/Pause
*'Shift' commands:
Rotary encoders:
- Select effect 2
- Effect 2 on/off
Rotary potentiometers:
- Effect 2 volume
- Effect 2 parameter 1
- Effect 2 parameter 2
- Effect 2 parameter 3
Linear faders:
Push buttons:
- Pad1
- Pad2
- Pad3
- Hotloop1
- Hotloop2
- Hotloop3
Rotary encoder:
- Select pitch mode
- Key
Jog Wheel:
- Scratch/Pitchbend
Illuminated push buttons:
- Set Cue
- Brake
- 609.65 KiB
-
-
-
[BEHRINGER BCD 2000] MixVibes 6 3DEX
Lastest edition of the MIDI files needed to control BCD 3000 controller with Mixvibes 3DEX version 6.
- 3.66 KiB
-
-
-
[BEHRINGER BCD 2000] MixVibes 6 PRO
Lastest edition of the MIDI files needed to control BCD 2000 controller with Mixvibes Pro version 6.
- 3.66 KiB
-
-
-
[BEHRINGER BCD 2000] MixVibes 7
Edition of the MIDI file needed to control Behringer BCD 2000 controller with Mixvibes 7.21.
*Explanation of some buttons:
- Back to top: location 1
- Loop in: autoloop
- Loop out: loop memory 1
- Talk over: mediabase selection -1
- On air: mediabase selection +1
- Analog input A: monitor 1
- Analog input B: monitor 2
- Phones Split: switch to active a player (mainly for the FX section)
FX buttons:
- A: FX on/off
- B: select FX -1
- C: select FX +1
- D: select FX preset
FX knobs:
- A: FX volume (dry/wet)
- B: FX parameter 1
- C: FX parameter 2
- D: FX parameter 3
- 251.79 KiB
-
-
-
[BEHRINGER BCD 3000] MixVibes 6 3DEX
Last edition of the MIDI files needed to control BCD 3000 controller with Mixvibes 3dex version 6.
- 3.69 KiB
-
-
-
[BEHRINGER BCD 3000] MixVibes 6 PRO
Lastest edition of the MIDI files needed to control BCD 3000 controller with Mixvibes Pro version 6.
- 3.68 KiB
-
|
|
|